Medpage MemRabel 2 User Manual

CHOICE OF TIME DISPLAY FORMATS

CHOICE OF TIME SCREEN COLOUR

20 PROGRAMMABLE ALARMS

CREATE REMINDERS WITH PHOTOS, AUDIO OR VIDEO

PRE-INSTALLED READY-TO-USE REMINDER FILES

IN THE BOX This manual, 1 x MemRabel 2 Screen, 1 x A/C Power
adaptor, 1 x Remote Control, 1 x Stand Attachment.
First insert the stand attachment into the stand socket
and tighten. Next insert the A/C power supply jack plug
into the socket marked DC. Plug the power adaptor into
a convenient mains power socket. MemRabel 2 will
perform a start-up sequence and after a few seconds
will revert to the default time display screen. You can
change it later if you wish.
MemRabel 2 must be connected to a mains power supply at all times. In the event
of a power failure or accidental removal of the power adaptor from the mains, when
power is reconnected the correct time and alarm settings will be restored
automatically. During a power down, MemRabel 2 alarms are inactive.
Locate the remote control. Gently pull out
the plastic battery isolator tab to activate
the remote control. Note: The remote
control is solely for the purpose of setting
the time and alarm time reminders. When
all settings are complete please store the
remote control in a safe place to prevent
tampering or accidental switching off of
the MemRabel 2.
MemRabel 2 User Manual REV 07/17
The Active Daily Reminder Clock
MOUSE MODE
DO NOT USE
VOLUME UP
VOLUME DOWN
MedPage Ltd
NO FUNCTION
MENU BUTTON
MENU NAVIGATION
BUTTONS
EXIT BUTTON
01536 264849