Download Print this page

Advertisement

Quick Links

OWNER'S MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the Tiquattro EB and is the answer not in the manual?

Questions and answers

Summary of Contents for ITALMOTO Tiquattro EB

  • Page 1 OWNER’S MANUAL...
  • Page 2 ITALMOTO is one of the best electric bike companies based in Italy. We produce high-quality and unique style electric bike with high-profile components. Open the carton box and take out your Tiquattro EB carefully. The package has following items: HEAD...
  • Page 3: Install Handle Bar

    Install Handle Bar Loosen the bolts to put handle bar in between. Use the reserved 4 bolts to install handle bar as picture shown. Adjust handle bar angle and fasten the 4 bolts one by one to 20N.M.
  • Page 4 headlight frame Install Head Light Use reserved bolts and bushing to install head light. Adjust height and angle, then fasten all the bolts. Connect the light power cable.
  • Page 5: Install Front Wheel

    Install Front Wheel Make sure the brake disc is placed in the center of caliper gap and front wheel can rotate freely without any noise. When the brake disc is not in the gap, DO NOT pull brake lever.
  • Page 6: Install Pedals

    Install Pedals Use the pedal marked with an “L” on the left side and the right pedal marked with an “R” on the right side (side with drivetrain gears). The right-side pedal has a right-hand thread (removes counterclockwise, installs clockwise); the left side pedal has a left-hand thread (removes clockwise, installs counterclockwise).
  • Page 7 Insert, Remove or Adjust Saddle Height...
  • Page 8 Charge Battery before Your First Ride *On charger adapter, red light stands for charging, while green light stands for charging finished.
  • Page 9 If you are not going to use the battery for long time, take out the battery out of your  ITALMOTO e-bike, and store it with 50% battery left. Do not use battery when it has less than 10% capacity left.
  • Page 10 Power ON/OFF your battery Beside the charging port, you’ll find a separate switch to power ON/OFF your battery. Make sure switch on before your ride, and off after ride. It helps protect the battery from draining itself.
  • Page 11 controller receiving error KM/H 00100 120.6Km TRIP Head Light Control On the handle bar, there is a separate switch for head light. Push the button down to: Downside: High Beam  Upside: Low Beam  Don’t forget to switch off the light and battery when you finish riding. This operation helps a lot with your battery lifetime.
  • Page 12 Press + or – to adjust PAS speed level. There are 5 PAS levels by default.  Hold Set button for 2 seconds to enter setting interface, where you have bunch of  options to customize. For more advanced settings, contact ITALMOTO. ...
  • Page 13: Troubleshooting

    Troubleshooting If there are errors about the electronic control system, the error code will appear automatically. Error Code Definition Solution Current error or MOS damaged Replace controller Disconnect throttle wire(located in controller box, or in front of handle bar if the bike has water Throttle Abnormality proof quick release...
  • Page 14 Disconnect 2 brake lever wires(located in front of handle bar to see whether the ERROR code Brake Abnormality disappears. If yes, replace the brake lever and reconnect brake lever wire to controller. Fully charge the Under voltage battery Do not block motor Motor stalling from rotating freely communication controller...
  • Page 15 TECHNICAL DATA BIKE Max power 250/500 W Max speed 25/45 Km/h Speed level Electric motor Brushless Battery Manufacturer Samsung Features 36/48V – 15 Ah Ioni di Litio Autonomy 60/80 Km Charging time Life 800 cicli Panel Display LCD, Speed Power, On/ Features Off, battery level, light switch Aluminium...
  • Page 16 Further information about Italmoto vehicles can be found on the following website: http://www.italmoto.com www.italmoto.com Italmoto is a Brand by: Italiana Veicoli Srl - Rome, Italy...