Demo Mode; About Demo Mode; To Launch Demo Mode; To Exit Demo Mode - Daikin BRC1H519K7 Installer And User Reference Manual

14 About the app
Installer mode settings
Installer mode
Temporary / Indefinite
Installer mode indicator
INFORMATION
Mind that installer mode is automatically enabled as soon
as you enter the installer mode menu.
14.4

Demo mode

14.4.1

About demo mode

To try out the app's operation and configuration functions in a safe
environment, it is possible to launch a demo version of the app.
14.4.2

To launch demo mode

Prerequisite: You are not in demo mode.
1 Go to the main menu.
2 Tap "Demo mode".
Result: You are in demo mode.
14.4.3

To exit demo mode

Prerequisite: You are in demo mode.
1 Go to the main menu.
2 Tap "Exit demo mode".
Result: You exited demo mode.
14.5

Functions

14.5.1

Overview: Functions

Category
Operation
Installer and user reference guide
36
Description
Enable or disable installer mode.
Set the duration of installer
mode.
▪ Temporary: installer mode
active for 30 minutes. After 30
minutes, installer mode will
automatically deactivate.
(default)
▪ Indefinite: installer mode active
until the next manual
deactivation.
Set whether installer mode
activation is indicated by the
installer mode indicator.
Control
Turn ON/OF unit operation
Read out temperature sensor
information
Change the operation mode
Change the setpoint
Change the fan speed
Change the ventilation mode
Change the ventilation rate
Change the airflow direction
See notifications
Category
Configuration and advanced
operation
Control
Make controller and indoor unit
settings:
General
▪ Firmware update
▪ Notifications
Remote controller settings
▪ Master/slave status
▪ Screen
▪ Status indicator
▪ Date and time
▪ About
▪ Remove bonding information
Energy saving
▪ Presence detection
▪ OFF timer
▪ Energy consumption
(a)
▪ Power consumption limit
▪ Setpoint auto reset
>> to be continued
BRC1H519W+K+S7
Wired remote controller
4P513689-1D – 2019.05