Error Codes; Error Message - Cook's Companion CCNIB/B414124 Care And Use Instructions Manual

Timer:
Increase or
Function:
Use (+)
Decrease
Adjust to
or (-)
Temp. &
desired
buttons
setting
Preset
Function
Power
Locked:
LOC/Unlock
Time
ERROR CODES
Please refer to the below error codes for more information.

ERROR MESSAGE

The power button does not light
when you press the ON/OF button.
The Induction Burner makes a
beep sound.
Induction burner stops working
during any function
E0 Displays in the LED
E1 Displays in the LED
E2 Displays in the LED
E3 Displays in the LED
E4 Displays in the LED
E5 Displays in the LED
E6 Displays in the LED
E7 Displays in the LED
E8 Displays in the LED
SOLUTION
Check if the unit is plugged in correctly.
Check the circuit is functioning correctly.
Check if cookware is induction compatible.
Check if cookware is positioned correctly on the
burner surface.
The burner may suddenly stop heating.
Check if the fan area is blocked, as this is a sign
that the burner is over heating.
The fan may be broken.
Check the cookware is not empty.
Turn the temperature down.
Unplug the induction burner and let rest for 15
minutes, then plug in and check the functions.
Check if the cookware is induction compatible.
Turn off the induction burner and unplug to let
the burner cool down. Once the burner has
cooled, attempt to use again.
Check if the Voltage is too low, less than 80V.
Check that the circuit is functioning properly.
Check if voltage is too high, higher than 145V.
Check that the circuit is functioning properly.
Thermostat may be broken.
Turn off the induction burner and unplug to let
the burner cool down. Once the burner has
cooled, attempt to use again.
Thermostat may be broken.
Discontinue use, and contact customer service.
The burner may suddenly stop heating.
Check if the fan area is blocked, as this is a sign
that the burner is over heating.
The fan may be broken.
Turn off the induction burner and unplug to let
the burner cool down. Once the burner has
cooled, attempt to use again.
Check for damage to the burner.
Discontinue use, and contact customer service.
Sensor could be damaged or broken.
Turn off the induction burner and unplug to let
the burner cool down. Once the burner has
cooled, attempt to use again.
Discontinue use and contact customer service.
Sensor could be damaged or broken.
Turn off the induction burner and unplug to let
the burner cool down. Once the burner has
cooled, attempt to use again.
Discontinue use and contact customer service.