Spanning-Tree Loopguard Default; Spanning-Tree Guard Loop - D-Link DES-7200 Cli Reference Manual

DES-7200 CLI Reference Guide
Parameter
description
Default
configuration
Command
mode
Examples

18.1.22 spanning-tree loopguard default

Use this command to enable loop guard globally to prevent the root port or backup port
from generating loop since they can not receive bpdu. Use the no form of this command to
disable loop guard.
spanning-tree loopguard default
no spanning-tree loopguard default
Parameter
description
Default
configuration
Command
mode
Examples

18.1.23 spanning-tree guard loop

Use this command to enable loop guard on the interface to prevent the root port or backup
port from generating loop since they can not receive bpdu. Use the no form of this
command to disable loop guard.
spanning-tree guard loop
no spanning-tree guard loop
N/A.
Disabled.
Interface configuration mode.
DES-7210(config)# spanning-tree guard root
N/A.
Disabled.
Global configuration mode.
DES-7210(config)# spanning-tree loopguard default
Chapter 18 MSTP Configuration Commands
18-17