Texas Instruments CC2540 Software Developers Manual page 106

Configurable Parameters
ParamID
TGAP_CONN_ADV_INT_MAX
TGAP_CONN_SCAN_INT
TGAP_CONN_SCAN_WIND
TGAP_CONN_HIGH_SCAN_INT
TGAP_CONN_HIGH_SCAN_WIND
TGAP_GEN_DISC_SCAN_INT
TGAP_GEN_DISC_SCAN_WIND
TGAP_LIM_DISC_SCAN_INT
TGAP_LIM_DISC_SCAN_WIND
TGAP_CONN_EST_INT_MIN
TGAP_CONN_EST_INT_MAX
TGAP_CONN_EST_SCAN_INT
TGAP_CONN_EST_SCAN_WIND
TGAP_CONN_EST_SUPERV_TIMEOUT
TGAP_CONN_EST_LATENCY
TGAP_CONN_EST_MIN_CE_LEN
TGAP_CONN_EST_MAX_CE_LEN
TGAP_PRIVATE_ADDR_INT
TGAP_CONN_PAUSE_CENTRAL
TGAP_CONN_PAUSE_PERIPHERAL
TGAP_SM_TIMEOUT
TGAP_SM_MIN_KEY_LEN
TGAP_SM_MAX_KEY_LEN
TGAP_FILTER_ADV_REPORTS
106
GAP API
Description
Maximum advertising interval when in connectable mode
(n × 0.625 ms)
Scan interval used during Link Layer Initiating state, when in
Connectable mode (n × 0.625 ms)
Scan window used during Link Layer Initiating state, when in
Connectable mode (n × 0.625 ms)
Scan interval used during Link Layer Initiating state, when in
Connectable mode, high duty scan cycle scan parameters (n ×
0.625 ms)
Scan window used during Link Layer Initiating state, when in
Connectable mode, high duty scan cycle scan parameters (n ×
0.625 ms)
Scan interval used during Link Layer Scanning state, when in
General Discovery procedure
(n × 0.625 ms).
Scan window used during Link Layer Scanning state, when in
General Discovery procedure
(n × 0.625 ms)
Scan interval used during Link Layer Scanning state, when in
Limited Discovery procedure
(n × 0.625 ms)
Scan window used during Link Layer Scanning state, when in
Limited Discovery procedure
(n × 0.625 ms)
Minimum Link Layer connection interval, when using
Connection Establishment procedure
(n × 1.25 ms)
Maximum Link Layer connection interval, when using
Connection Establishment procedure
(n × 1.25 ms)
Scan interval used during Link Layer Initiating state, when
using Connection Establishment procedure
(n × 0.625 ms)
Scan window used during Link Layer Initiating state, when
using Connection Establishment procedure
(n × 0.625 ms)
Link Layer connection supervision timeout, when using
Connection Establishment procedure
(n × 10 ms)
Link Layer connection slave latency, when using Connection
Establishment proc (in number of connection events)
Local informational parameter about minimum length of
connection needed, when using Connection Establishment
proc (n × 0.625 mSec)
Local informational parameter about maximum length of
connection needed, when using Connection Establishment
proc (n × 0.625 mSec).
Minimum Time Interval between private (resolvable) address
changes. In minutes (default 15 minutes).
Central idle timer. In seconds (default 1 second).
Minimum time upon connection establishment before the
peripheral starts a connection update procedure. In seconds
(default 5 seconds)
Time (ms) to wait for security manager response before
returning Bluetooth Low Energy Time-out. Default is 30
seconds.
SM Minimum Key Length supported. Default 7.
SM Maximum Key Length supported. Default 16.
TRUE to filter duplicate advertising reports. Default TRUE.
Copyright © 2010–2019, Texas Instruments Incorporated
SWRU271H – October 2010 – Revised April 2019
Submit Documentation Feedback
www.ti.com