Craftsman 125.46569 Operator's Manual page 4

does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
■ Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
■ Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
■ Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
■ Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
■ Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations
different from those intended could result in
a hazardous situation.
■ Hold the power tool by the insulated
gripping surfaces when performing an
operation where the saw blade may come
into contact with hidden wiring. If the blade
contacts a "live" wire, it may activate the
exposed metal parts of the power tool and
could give the operator an electric shock.
■ Know your power tool. Read the Operator's
Manual carefully. Learn its applications
and limitations, as well as the specific
potential hazards related to this power tool.
Following this rule will reduce the risk of
electric shock, fire, or serious injury.
■ Always wear eye protection with side
shields marked to comply with ANSI Z87.1
when assembling parts, operating the tool,
SAFETY INSTRUCTIONS
4 ― English
or performing maintenance. Following
this rule will reduce the risk of serious
personal injury.
■ Protect your lungs. Wear a face or dust
mask if the operation is dusty. Following
this rule will reduce the risk of serious
personal injury.
■ Protect your hearing. Wear hearing
protection during extended periods of
operation. Following this rule will reduce
the risk of serious personal injury.
■ Battery tools do not have to be plugged
into an electrical outlet; therefore, they
are always in operating condition. Be
aware of possible hazards when not
using your battery tool or when changing
accessories. Following this rule will
reduce the risk of electric shock, fire, or
serious personal injury.
■ Do not use on an unstable support. Stable
footing on a solid surface enables better
control of the power tool in unexpected
situations.
■ Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
CIRCULAR SAW USE AND CARE
CUTTING PROCEDURES
DANGER
Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary
handle, or motor housing. If both hands are
holding the saw, they cannot be cut by the
blade.
■ Do not reach underneath the workpiece.
The guard cannot protect you from the
blade below the workpiece.
■ Adjust the cutting depth to the thickness
of the workpiece. Less than a full tooth of
the blade teeth should be visible below
the workpiece.
■ Never hold the piece being cut in your
hands or across your leg. Secure