Bryton App Advanced Settings; Grid Setting - Bryton Rider 15 User Manual

Bryton App Advanced Settings

After pairing your Rider 15 with Bryton Mobile App, you will have access to Grid Setting and
Altitude Calibration.

Grid Setting

You can customize your data page manaully, set your MHR, LTHR, turn on/off Smart Pause
and set Data Recording.
1. Pair Rider 15 with Bryton Mobile App
a. Turn on Rider 15.
b. Go to your phone "Settings>Bluetooth" and enable Bluetooth.
c. Go to Bryton Mobile App and tap "Settings>User Settings>Device Manager".
d. Tap "+" and choose "Bluetooth 4.0".
e. Select and add your device by pressing "+".
f. Tap "Pair" to pair your device with your phone. (For iOS phone only)
g. Tap "Finish" to complete pairing.
2. Customize Your Data Page
a. Tap "Settings > Grid Setting" in Bryton Mobile App
b. Tap "OK" to confirm connection to Rider 15.
c. Choose "Manual" for perfonal customization.
Choose "Auto" if you want to keep it at Default.
d. Tap left or right to change the number of grids.
e. Tap 1, 2, 3, 4, 5 to switch to different data page.
f. Tap data grid to change ride data.
3. Enter Your MHR and LTHR
a. Tap " " to enter settings.
b. Tap number next to MHR and LTHR to enter your MHR and LTHR value.
4. Turn On/Off Smart Pause
Tap Smart Pause column to turn on/off smart pause.
5. Set Data Recording
Tap Data Recording column to set your desired settings.
6. Sync New Settings to Rider 15
Tap left upper corner "<" and select "Sync" to sync your new settings.
NOTE:
x To change data grid back to default , go to
message pops up, tap "Yes" to confirm.
x To view step by step tutorial, please click below link.
with Bryton app
and tap Data Page. "Back to default settings?"
Bryton Rider 15/10/one | Grid Setting
18 Bryton App Advanced Settings