Table of Contents
Advertisement
4.4
Internal connectors
1.
Serial ATA 6.0Gb/s connectors (7-pin SATA5-6 [Gray])
Supported by the Intel
cables for Serial ATA hard disk drives that allows up to 6Gb/s of data transfer rate.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 10,
or RAID 5 configuration.
•
•
2.
Mini-SAS HD connector (ISATA1)
This motherboard comes with a mini Serial Attached SCSI (SAS) HD connector,
the storage technology that supports Serial ATA. The connector supports up to four
devices.
4-12
®
C242 chipset, these connectors are for the Serial ATA signal
The actual data transfer rate depends on the speed of Serial ATA hard disks installed.
When the M.2 connector is operating in SATA mode, SATA connector 5 and 6
(SATA 6 Gbps_5-6) will be disabled.
Chapter 4: Motherboard Information
Advertisement
Table of Contents
Need help?
Do you have a question about the RS300-E10-PS4 and is the answer not in the manual?
Questions and answers