Advertisement
Table of Contents
- 1 Components, Features and Connections
- 2 Items Included in the Box
- 3 Turntable Platter and Belt Setup
- 4 Cartridge Downforce Adjustment
- 5 Connection to Amplifier/Speakers
- 6 Main Power Connection
- 7 Turntable Operation
- 8 Maintenance and Cleaning
- 9 Cartridge Replacement
- 10 Technical Specifications
- 11 Troubleshooting
- 12 The Platter Doesn’t Turn Although the Unit Is Switched on
- 13 No Signal through One or Other Channel or both Channels
- 14 Distorted of Inconsistent Sound from One or both Channels
- Download this manual
Advertisement
Table of Contents
Related Manuals for argon audio TT
Summary of Contents for argon audio TT
- Page 1 T T M a n u a l Argon TT...
- Page 2 T T M a n u a l COMPONENTS, FEATURES AND CONNECTIONS Counterweight Turntable Platter Tonearm Lift Lever Tonearm Rest 33/45 Selector Tonearm Stop/Start button Cartridge RIAA ON/OFF Switch Lid Hinge AC-DC Power Jack Ground Connector Power Rocker Switch PHONO & Line Out Jacks...
- Page 3 T T M a n u a l Please check thoroughly and make sure you find the following items that are included in the box: Unit Turntable Mat Adaptor with EU plug end Instruction Manual Counterweight Cartridge Alignment Protractor Platter with drive belt Drive Belt Hook 45 RPM Adaptor 10) RCA to RCA cable...
- Page 4 T T M a n u a l Cartridge Downforce Adjustment The Counterweight supplied is suitable for cartridges weighing between 3.0-6.0g. - Gently push and turn the Counterweight onto the rear of the tonearm (with the scale facing toward the front of the turntable). - Remove the cartridge protection cap.
- Page 5 T T M a n u a l adaptor into your power outlet. Operation Turntable Operation 1. Connect the included power adapter to unit and press the power rocker switch to be “ON” position. 2. Remove the needle cover from the cartridge. 3.
- Page 6 T T M a n u a l Useful Tips The turntable should be positioned on a low-resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing playback. Cartridge Replacement 1. Before replacement, put the stylus protector back on the stylus to prevent damage to the stylus during the replacement process.
- Page 7 T T M a n u a l Technical Specifications: Nominal Speeds 33 1/3 & 45RPM Speed Variance ±1.5% ≤0.15% Wow and Flutter Signal to Noise 55dB Down force Range 3.0-6.0g 8.6” (218.5mm) Effective Tonearm Length Overhang 0.73in Power Consumption Outboard Power Supply 12V/ 500mA AC-DC Dimensions (W x H x D)
- Page 8 T T M a n u a l Troubleshooting The platter doesn’t turn although the unit is switched on: - Drive belt is not installed or has slipped off. - The unit is not connected to the main power supply. - No power at the outlet.
Need help?
Do you have a question about the TT and is the answer not in the manual?
Questions and answers