Operate Via Hilookvision App; Enable Hilookvision Service On Camera; Enable Hilookvision Service Via Sadp Software - HIKVISION HiLook IPC-B120H-U Quick Start Manual

Network Bullet Camera·Quick Start Guide

5 Operate via HiLookVision App

Purpose:
HiLookVision is an application for mobile devices. With the App, you
can view live image of the camera, receive alarm notification and so
on.
Note:
HiLookVision service is not supported by certain camera models.

Enable HiLookVision Service on Camera

Purpose:
HiLookVision service should be enabled on your camera before using
the service.
You can enable the service through SADP software or web browser.

Enable HiLookVision Service via SADP Software

Steps:
1. Check the checkbox of Enable HiLookVision on:
"Activate the Device" page during camera activation, refer to
1).
Chapter 3.2.2.
Or "Modify Network Parameters" page during modifying IP
2).
address, refer to Chapter 3.3.
2. Create a verification code or change the verification code.
32