Table of Contents
Advertisement
Instruction Manual
PCM F
2.3.4 Accessories (optional)
Memory card
Read-out adapter
Card reader
Connector-Box
Power supply
Pipe mounting system
Suspension bracket with
eyelet
Power pack / battery
charger
Evaluation software
External battery box
Connection cables
PCM F - Rev. 00 as of 24.10.2007
type: Compact Flash Card; capacity: 128 MB
adapter for PCMCIA interfaces, mainly for read-out via Laptop / Notebook
with USB interface for PC connection
for simultaneous connection of more than one output or input to the
PCM F multifunctional socket
rechargeable lead gel battery: 12V/12 Ah
rechargeable lead gel battery: 12V/26 Ah, for use in external battery box
battery compartment for 12 LR20 standard batteries 1.5V
for temporary, non-permanent clamping installation of wedge sensors
(Doppler sensor and air-ultrasonic sensor) in pipes DN 200 – 800
(diameters from 7.9 in to 31.5 in) and egg profiles up to h = 600 mm
(height = 23.6 in)
to fasten the PCM F on access ladders or similar
combined battery charger for rechargeable lead gel batteries or for direct
mains operation, 100-240 V AC/50-60 Hz; IP 40
type: NivuDat for Windows NT / 2000 / XP for data read-out, data
evaluation, generation of hydrographs, average values, hour, day and
month totals and more
external battery box for connection to PCM F via charger socket
there are numerous pre-configured cables for connection of peripheral
units available. Please refer to the respective chapters for details
Page 13
Advertisement
Table of Contents
