Agilent Technologies PNA Series User And Programming Manual page 946

Write/Read
ControlLines Property
Description Sets the control lines of the specified test set. Control lines, provided through the front
panel connector of a test set, are used to control external equipment such as a part
handler. See your test set documentation to learn more about control lines.
VB Syntax tset.ControlLines (chNum) = value
Variable (Type)
tset A
OR
An
chNum (Integer) Channel number of the measurement.
value (Double) Data value used to set control lines. Values are obtained by adding weights
from the following table that correspond to individual lines.
Refer to your test set documentation for setting control line values.
Return Type Variant
Default 0
- Description
TestsetControl object.
E5091Testset object.
Line Weight
1 1
2 2
3 4
4 8
5 16
6 32
7 64
8 128
The E5091A interprets SENS:MULT1:OUTP 0 as all lines LOW.
All "Z"and "H" series test sets interpret SENS:MULT1:OUTP 0 as all lines HIGH.
952
About E5091 Testset Control
About External Testset Control