Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for PowerGrip YG-2
- Page 1 YG-2 CLEAN POWER CONSOLE OPERATION MANUAL...
-
Page 2: General Data
GENERAL DATA GENERAL DATA POWERGRIP YG-2 power console is intended for connected equip- ment protection against overvoltage, power surges and network interference of various kinds. Due to a great number of digital power modules in the network there is a large amount of high-frequency interference which disturbs the operation of devices with traditional power modules. -
Page 3: Specifications
SPECIFICATIONS SPECIFICATIONS • Electrical characteristics: 190 – 256 V ~ 16 А (3680 W at 230 V) • Number of power outlets: 6 programmable outlets • Energy indicator in Joules: 2,220 J • Maximum peak current: 65,000 A • Limits at which emergency shutdown of power supply occurs: ≤... -
Page 4: Appearance And Controls
APPEARANCE AND CONTROLS APPEARANCE AND CONTROLS FRONT PANEL 1. Power ON/OFF button controls switching on and off of the group of outlets. Its readings may differ from other measuring devices 2. Voltmeter displays a current value of voltage in the mains line. 3. - Page 5 (not included in the delivery package). To find out more about the use of RS232 port for control systems connection please visit to POWERGRIP.COM 10. Ground terminal is designed for optional grounding of devic-...
-
Page 6: Equipment Connection
EQUIPMENT CONNECTION EQUIPMENT CONNECTION In POWERGRIP console outlets different types of filters are used, which allow to achieve the best results for certain equipment. For connecting equipment with digital power modules a multi-level filter is provided designated as DIGITAL (used in the first and second group of outlets). -
Page 7: Safety Rules
SAFETY RULES SAFETY RULES POWERGRIP power console should be connected directly to the stationary grounded outlet of the power network. Do not connect console in parallel (i.e. daisy chain connection) to other electrical devices, such as power supply protection devices, power filters or UPS. - Page 8 CONTROL VIA SENSOR CONTROL VIA SENSOR The sensor is located in the bar under the digital indicator. There are 3 types of sensor action (for sensor activation it is neces- sary to fix the action for approximately one second): To change the brightness bring the hand close to the screen (10 –...
-
Page 9: Configuration Menu
CONFIGURATION MENU CONFIGURATION MENU To enter configuration menu, disconnect the console from the power outlet, wait for the screen to blink off, plug the console into the outlet with pressed power button. Short pressing of power button enables to change the settings of the selected menu item, prolonged pressing moves you to the next menu item. -
Page 10: Measurement Mode
CONFIGURATION MENU / MEASUREMENT MODE Sensor mode: 0 – only brightness by bringing the hand close 1 – brightness by bringing the hand close + first group activation using one finger touch + second group activation by two fingers touch 2 –... - Page 12 For detailed information on port RS232 application for control system connection visit POWERGRIP.COM Power Console Model: YG-2 Designed & Engineered in Russian Federation Assembled in Taiwan Manufacturer: AO «Barnsly Import» Office 10, 3 bld.1, Signalny Proezd, Moscow 127106, Russia www.powergrip.com...
Need help?
Do you have a question about the YG-2 and is the answer not in the manual?
Questions and answers