Actron OBD II PocketScan Code Reader CP9125 User Manual page 8

NOTE: If diagnostic trouble codes (DTCs) are already being
displayed from a previous read operation, press and hold
READ/Scr READ/Scr READ/Scr READ/Scroll Do READ/Scr
6.Observe a Moving
NOTE: If a "No Link" message
No No No Link Link
No Link Link
displays, cycle ignition key to
the OFF position for 10
seconds, then back ON and repeat "Reading Diagnostic
Data."
7. View Codes on Display
NOTE: If there are no codes present,
the tool will display "0 0 0 0 0
Codes" and proceed to
Codes Codes Codes Codes
display MIL Status when
pressed.
•
To View Codes press and
release
Do Down Do wn wn wn key.
Do Do wn
• If the code is a Pending
Code a will be displayed.
oll Down oll Do oll Do oll Do wn wn key for 3 seconds and release. wn wn
* on Display.
No Link
3 Codes
0 Codes
READ/Scr READ/Scr READ/Scroll Do
READ/Scr READ/Scr
P0443
READ/Scroll READ/Scr READ/Scr READ/Scr READ/Scr oll oll oll oll
P0452
8
*
oll Down oll Do oll Do wn is wn wn
oll Do wn