Range Test; Compass Calibration - GRAUPNER Alpha 150Q Manual

Range test

Compass calibration

11.6V Alt:
0:00 Dir:
10mAh I
6
0km/h
C+00016 +00060 -00011
16571.GPS_Alpha150Q_V2.0sh.en
Carry out the range test of a Graupner HoTT remote control system
according to the instructions in your transmitter manual. It is useful
to have an assistant who helps you.
Attention
Never start a range test on the transmitter during normal model
operation!
Attention
• Before taking up flight operations on any other airfield, the com-
pass should be recalibrated as described in the "MULTICOPTER
BASIC" display of the telemetry menu.
• The motors can not be started until the GPS signal from at least
0m
6 satellites is received.
0°
0A
• If the copter still does not hold the position, perform a current
0m
0°
calibration as described in the "MULTICOPTER BASIC" display of
the telemetry menu.
13 / 48