Takstar SGC-598 Quick Start Manual page 2

Welcome to use Takstar condenser microphones. SGC-598 is specially
designed for camera, interviews and other applications. It matches with a
majority brand of vedio camera, SLR camera and be simply fixed on the
camera. Please read this manual detailedly before using to make sure the
correct operation and exert the optimum function.
Features
High sensitivity condenser microphone specially designed for camera
Cardioid directivity characteristic can effectively reduce the ambient noise
Optional +10dB sensitivity tone up and 200Hz bass filter meet the demand
of different applications
Standard connector size for easy connection with camera
Shock proof design can reduce the mechanical noise of cameras and other
vibration noise
Rugged alu mic housing features effective EMI resistance
Powered by 1.5V AA alkaline battery, playtime is up to 100hrs
Low power indicator
Specification
Transducer Principle: Back Electret Condenser
Directivity Characteristic: Cardioid
Frequency Response: 50Hz-16kHz
Sensitivity: -32dB±3dB(0dB=1V/Pa at 1kHz)
Sensitivity Tone Up: +10dB
Bass Filter: 10dB/octave at 60Hz
Output Impedance: 2000Ω±30%
Power Requirement: 1.5V AA battery
Frequency Response Graph
M i c r o p h o n e F r e q u e n c y R e s p o n s e d B R e f . 1 V / P a
-2 0
-3 0
-4 0
-5 0
-6 0
-7 0
20 50 100 200 500 1k
Function Illustration
5
Power switch: Push to "ON" for turning on the microphones and
1
conversely for turning off
Sensitivity tone up switch: Tone up the volume of microphone
2
Bass filter switch: Turn it on can reduce the ambient noise
3
Power indicator: Turn on the power switch, the indicator is green; when it
4
is at low power, the indicator is red
Guangdong Takstar Electronic Co.,Ltd.
Address: No.2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86 752 6383644
0°
3 3 0°
3 0 0°
2 7 0°
2 4 0°
2 10°
1 8 0°
Cardioid
2k 5k 10k 20k 1 2 5 H z
5 0 0 H z
1 0 0 0 H z
3 2 1
7
6
8
Fax: +86 752 6383952
SGC-598 Condenser Microphones
Windscreen
5
Battery compartment
6
Camera clip nut
7
Shock mount: Reduce the mechanical noise of cameras and other
8
vibration noise
Operation Instruction
1. Open the battery compartment and correctly install the battery according
to the marks of positive and negative polars.
2. Turn the camera clip nut right, then clip the microphone in the camera
socket and turn left to fix them. The shock mount is with distance
adjustable function, you can adjust microphone's position depending on
actual situation.
Φ
3. Insert 3.5mm plug of connecting cable into mic input socket of camera,
the microphone will work when you turn it on.
4. Microphone meet the demand of different applications and provide
optional +10dB sensitivity tone up and 200Hz bass filter.
Caution
1. The sensitivity of condenser microphone is too high to fall from high place
or given strong shock.
2. When the condenser microphone is not used, please store it in dry and
clean place. To avoid the effect of sensitivity and timbre, please don't
store or use it in the place with high temperature/humidity and strong
magnetic field.
3. When you stop using condenser microphone, please turn the power
switch off to save battery power.
4. When long time no use, please take out the battery to avoid battery liquid
leakage which will cause circuit damage.
30°
6 0°
Standard Configuration
9 0°
Windscreen: 1pc
12 0°
150° Microphone components: 1set
2 0 0 0 H z
Battery: 1pc
4 0 0 0 H z
8 0 0 0 H z
User manual: 1pc
Cloth bag: 1pc
4
Related specifications and configuration are subject to change without
*
notice.
If you need the information of service or accessories, please contact the
*
local dealer.
Email: sales@takstar.com Website: www.takstar.com