Table of Contents
Advertisement
Available languages
Available languages
Notes
• When another extension connected to line is in use, the line button flashes .
• When another call comes in on the other line, the corresponding line button
flashes and two beeps are heard from the speaker, but the phone won't ring.
(see page 30).
• If a call is put on hold for more than about three minutes, you will hear an
alarm.
Tips
• You can switch to speakerphone during conversation by pressing
(SPEAKERPHONE). Then you can replace the handset in the cradle.
To switch back to the handset, pick up the handset again.
• When you pick up the handset or press (SPEAKERPHONE), the vacant line is
automatically connected from line 1 to line 4. When neither line is in use, line
1 is connected.
To obtain the best speakerphone performance
• You may not be able to hear the other party's voice in a noisy place.
Therefore, use the speakerphone in a quiet room.
• Do not bring your hand or other objects too close to the microphone
or you will hear a shrill noise ("feedback").
• When the speaker volume is loud, or the telephone has been placed
close to a wall, you may find that the volume drops suddenly. This is
due to a circuit in the telephone designed to protect against
feedback. In such cases, lower the speaker volume slightly.
continued
25
US
Basics
Advertisement
Table of Contents
