Universal Videohub Status Led's - Blackmagicdesign Videohub Installation And Operation Manual

Installing a Universal Videohub 72 Crosspoint Card.
Installing a Universal Videohub SDI Interface.
Handle Status
lights
Universal Videohub 72 Crosspoint

Universal Videohub Status LED's

The status LED's marked 'alarm', 'power overload' and 'ref in' provide you with an indication of
the current state of the Blackmagic Universal Videohub 72 Crosspoint. The following LED
conditions provide specific information about the status of the unit.
Red 'alarm' LED:
‚ Off: No error. Normal operation
‚ On: Error condition. Other error. Telnet into device to get error code.
‚ 1 flash: Error condition. Fan failure.
‚ 3 flashes: Error condition. No redundant power supply.
Red 'power overload' LED:
‚ Off: Normal operation. Inactive / Slave mode.
‚ Slowly blinking: Normal operation. Active / Master mode.
‚ On: Error condition. Power overload. Not enough power is being supplied
USB 2.0
Reference RS-422 router Ethernet
In control router control
Handle
Universal Videohub Routers 38