Graphic Terminal Menu Structure - Carrier 50FF Series Control Manual

4 - GRAPHIC TERMINAL MENU STRUCTURE

Main menu
A
GENUIT
B
HCCONFIG
C
SETPOINT
D
GASCONFIG
E
INPUTS/OUTPUTS
F
MODES
G
GENCONFIG
H
SERCONFIG
I
USERCONFIG
J
BMSCONF
K
PASSWORDS
L
SCHEDULE
M
ALARMS
N
GENTEST
O
CRTL_ID
4.1. Passwords
3 levels of access are confi gured for access to the parameters
screens: level 1 (no password), level 2 (with password) and level
3 (with password).
Level 3 password allows access to all level 2 screens.
Change in the level of access
From the initial screen of the terminal, by pressing the
the MAIN MENU is acceded.
The keys and enable navigating through the menu until
the Group of screens: K. PASSWORDS is reached.
This group of screens is accessed by pressing
screen is displayed:
Access level
CURRENT LEVEL : 1
Selection Level 2:
Selection Level 3:
16
Access level
Level 1
Level 1
Level 1
Level 1
Level 1
Level 1
Level 3
Level 2
Level 2
Level 2
Level 1
Level 1
Level 3
Level 3
Level 1
key,
. The following
NA01
Press the key until the cursor is placed on the desired access
level. Then, press on the
Access level
CURRENT LEVEL : 1
Selection Level 2:
Selection Level 3: ->
The screen to enter the password is visualised. If this password
is needed, please consult.
Enter level 3
password:
The terminal comes back to the level 1 after a period of inactivity
of 10 minutes. The change of level can also be done from one
screen of this menu.
Manufacturer menu
a.Unit Config.
b.Defrost Config.
c. Compressor Config.
d. Regulation Config.
e.Safety Config.
f. Alarm Config.
g. EEV Config.
h.Initialization
Service menu
a.Configuration
b.EEV Setpoints
c.Plug-fan
d.Calibration
e.Simulation
f.Working Hours
key.
NA01
NA05
0000