Getting Started; Hooking Up The System - Sony MHC-NXM1 Operating Instructions Manual

Getting Started

Hooking up the system

Perform the following procedures 1 to 4 to hook up your system using the supplied cords and
accessories. MHC-NXM3 is used for illustration purpose.
Right speaker
1 Connect the speakers.
Connect the right and left speaker cords to
the SPEAKER terminals on the unit and to
the terminals on the speakers (MHC-NXM3
only) as shown below.
Main Unit
6 GB
AM loop antenna
Speakers (MHC-NXM3 only)
2 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
FM lead antenna
Left speaker
Black (#)