elero Unitec-868 Operating Instructions Manual
Hide thumbs
Also See for Unitec-868:
- Operating instructions manual (15 pages) ,
- Operating instructions (2 pages)
Table of Contents
Related Manuals for elero Unitec-868
Summary of Contents for elero Unitec-868
- Page 1 UniTec-868 No. 28 330.0001 Operating instructions Please take care of the operating instructions! elero UK Ltd. Foundry Lane Halebank Widnes, Cheshire WA8 8TZ sales@elerouk.co.uk www.elero.com 309401 Nr. 18 100.6701/0505...
-
Page 2: Table Of Contents
Mounting of wall bracket ....... . . GB -5 • Only use unmodified original elero electrical Explanation of functions . -
Page 3: Explanation Of Buttons
Explanation of buttons General information/intended use Explanation of buttons General information You can control one or more receivers with the UniTec-868 transmitter. This device features a very simple operation. UP-button Manual/automatic sliding switch Intended use STOP-button Indicator lamp Auto The UniTec-868 may only be used for controlling roller shutter or sun protection devices. -
Page 4: Advices
With venetion • Push the UniTec-868 onto the wall bracket from above. blinds, the slats are inverted. Press the UP-button briefly twice successively. -
Page 5: Programming The Radio
Programming the radio Programming the radio Program the transmitter Advice: If several receivers are connected to the same feed line, then all are simultaneously ready to program. Condition: The drive must be installed. The roller shutter starts a “random” brief up/down trip. 1. -
Page 6: Intermediate Positions For Roller Shutters/Awnings/Venetian Blinds
Intermediate positions for Intermediate positions for roller shutters/awnings/venetian blinds roller shutters/awnings/venetian blinds Approach Pos B Roller shutters Awning Venetian blind Condition: The transmitter is now programmed. 1. Press the DOWN-button briefly twice successively. 2. The drive travels to the stored intermediate position. If no intermediate position has been stored the blind/ shutter travels to the lowest end position. -
Page 7: Deletion Of Individual Transmitters
The maximum sending range within a building is up to 20 m and The company Firma elero GmbH herewith declares that the in the open air up to 150 m. UniTec-868 conforms to the basic requirements and other relevant regulations of Directive 1999/5/EC. GB-11... - Page 8 Warnhinweise GB-13 GB-14...
Need help?
Do you have a question about the Unitec-868 and is the answer not in the manual?
Questions and answers