Winac Rtx - Siemens SIMATIC PCS 7 BOX Function Manual

WinAC RTX

What is WinAC RTX?
WinAC RTX is a software package for a PC-based automation system. This software package
contains the Windows Logic Controller RTX (software PLC WinLC RTX).
Connection of I/O
WinAC RTX can control distributed I/O both via PROFIBUS and via PROFINET .
By means of an integrated data record gateway, WinAC RTX 2010 (V4.6) enables direct
access to field devices that are connected via a communication processor at the fieldbus.
The isochronous mode system function is supported. This feature enables you to realize fast,
time-dependent applications, for example, closed loop controls, with distributed I/O.
PCS 7 Advanced Process Library with WinAC RTX
The following setting is required for all relevant block types (see Additional information) when
using the "PCS 7 Advanced Process Library (APL)":
For each block instance of one of these block types used in the application, bit number 22
should be preset with "1" at the "Feature" I/O.
Additional information
● You can find additional information on the relevant APL block types in the PCS 7 Advanced
Process Library online help in the following section:
Basics of APL > Selectable block response > Functions that can be set via the "Feature" I/
O > Configurable functions with the Feature I/O >
Bit "Number 22" ("Update acknowledgment and error status of the message call")
● Manual
BOX (V8.1)
Function Manual, 03/2015, A5E32711362-AC
SIMATIC; Windows Automation Center RTX; WinAC RTX 2010
4
23