3.9.5
Enable or Disable SNMP Agent
The QuickPanel
Operator Interface can be enabled as a Simple Network Management Protocol (SNMP) Agent with
+
the capability to communicate with SNMP Managers for notification of Traps and responding to Query HMI Tag
values.
Since it is designed to run over a public network, SNMP communication is disabled by default on the QuickPanel
for security reasons. As a security measure, the SNMP feature requires a tactile input gesture to enable and disable
SNMP
communication.
Note Refer to the section
Simple Network Management Protocol (SNMP)
Note Enabling or disabling SNMP communication is a one-time user configuration.
➢ To enable the SNMP Agent
1. From the Start menu, select Programs, System, and QuickPanel
QuickPanel
OS Utilities Settings window.
+
2. Enable SNMP communication.
Attention
36
GFK-2847W
For public disclosure
Click Yes to acknowledge the security
risk and enable SNMP communication .
SNMP communication is enabled on the device only when the user acknowledges
this security dialog box and clicks Yes.
for further details.
OS Utilities Settings Tool to display the
+
+
From the QuickPanel
Settings window, select SNMP.
Double-tap Enable to enable
SNMP communication .
QuickPanel⁺ Operator Interface User
Manual
device
+
OS Utilities