Emptying The Dust Cup; Cleaning And Replacing The Filters - Shark Lift-Away ZU780 Series Owner's Manual

EMPTYING THE DUST CUP

IMPORTANT: Unplug the power cord before performing any maintenance.
To remove Dust Cup, slide up the buttons on the
sides of the handle. Tilt dust cup, then lift
to remove.
To remove collected debris from Lint Screen,
press top release button and lift handle to
open. Gently brush lint screen to clean.
s h a r kc l e a n . c o m
To empty debris, press lower release button
and bottom of dust cup will drop open.
To reinstall, place bottom of dust cup into
pod and then tilt until it clicks into place.

CLEANING AND REPLACING THE FILTERS

CLEANING FILTERS
Regularly clean and replace your filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water ONLY to prevent damage from cleaning chemicals. Allow
all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being
drawn into electric parts.
IMPORTANT: DO NOT use soap when cleaning the filters.
CLEAN PRE-MOTOR FILTERS
EVERY 3 MONTHS
Remove Dust Cup, then lift out Filters.
Filter
Cover
CLEAN HEPA FILTER
EVERY YEAR
Press Filter Access button at bottom of
Filter Cover. Tilt cover and lift out. Remove
HEPA Filter.
To reinstall, insert HEPA filter into unit and
replace the cover.
s h a r kc l e a n . c o m