English; Safety Information; Irig Blueboard; Irig Blueboard Firmware Update - iRig BlueBoard User Manual

English

Safety Information

• To reduce risk of internal damage or malfunction, never expose the unit to rain, moisture or excessive
humidity. Never let any liquid spill on the unit.
• Always remove the batteries if you plan not to use the unit for a long time.
• Never expose the unit to a temperature higher than 60°C (140°F) .
• Never step over the unit or step on it with your full weight, this might cause permanent damages to the iRig
BlueBoard structure and foot switches.
• There are no user serviceable parts inside iRig BlueBoard, never open the unit.
• All servicing should be referred to qualified personnel only.
• iRig BlueBoard communicates via Bluetooth. Never insert iRig BlueBoard into metallic cases or structures
that could shield the Bluetooth signal.
• CAUTION: risk of explosion if battery is replaced by an incorrect type. iRig BlueBoard can ONLY be
used with consumer grade, non-rechargeable CARBON-ZINC or ALKALINE batteries.

iRig BlueBoard

Thank you for purchasing iRig BlueBoard, the first wireless MIDI-pedalboard controller for iPhone, iPod touch,
iPad and Mac.
Your package contains:
• iRig BlueBoard
• 4 x AAA batteries
• Quick Start Guide
• Registration Card
iRig BlueBoard is the first wireless MIDI pedalboard for iOS and Mac. It allows you to control parameters
of your MIDI-compatible apps, like AmpliTube, wirelessly from the floor. Switch between presets, change
patches, turn effects on and off and control effects like volume and wah pedals, all from the stage floor, without
worrying about tripping over wires. Setup is as simple as turning the iRig BlueBoard on and setting its control
assignments in the free control app.
And now iRig BlueBoard can work as a standard BTLE MIDI device, it's able to directly communicate with apps
without the need of an in-between "bridge" app (Firmware update required).

iRig BlueBoard Firmware update

The FW update v1.2.0 allows for the new MIDI over Bluetooth modes operations. You need a unit with this
version of FW installed to use the new features of iRig BlueBoard. A firmware updater utility is available in the
Firmware Updates section on your User Area. If your unit does not have the last FW installed you can refer only
to the "BlueBoard mode" section on this manual.
3