Table of Contents
Advertisement
Selecting the speaker
setting
(LBT-ZX99i only)
You can select the speakers which you
want the sound to be output.
1
Press X-ROUND ON/OFF
repeatedly to select "X-ROUND
OFF".
The X-ROUND button lights off.
2
Press SPEAKERS.
Each time you press the button, the
corresponding speaker indicators light
up and the display changes cyclically
as follow:
SPEAKERS A t SPEAKERS B t
SPEAKERS A+B
To select
Display
The front
SPEAKERS A
speakers
The surround
SPEAKERS B
speakers
Both the front
SPEAKERS A+B
and surround
speakers
Notes
• When X-ROUND mode is selected, the
speaker system setting automatically changes
to SPEAKERS A+B.
• When the headphones are connected to the
PHONES jack, the speaker system setting is
automatically changed to "SPEAKERS A+B"
and you cannot change this setting.
Enhancing the video
game sound
— Game Sync
You need to connect a video game player
(see "Hooking up the system" on
page 11).
GAME
GAME
GAME INPUT
VIDEO
Press GAME.
The GAME function and the "GAME"
preset effect is selected automatically.
Tips
• If you press GAME while the system is turned
off, the system turns on automatically and
GAME is selected as the function.
• You can also press FUNCTION (or
FUNCTION +/– on the remote) repeatedly to
select "GAME".
GAME
MIXING
25
US
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Muteki LBT-ZX66i and is the answer not in the manual?
Questions and answers
Saludos cordiales: El equipo enciende, pero la luz del interruptor de encendido se queda intermitente y no enciende.
The power button light on the Sony Muteki LBT-ZX66i blinks and the unit does not turn on due to one of the following reasons:
- A power failure has occurred, requiring the clock and timer settings to be reset.
- The speaker connections may be incorrect or short-circuited.
- The ventilation holes on the rear of the unit may be blocked.
- There could be an issue with the speaker system setting.
- The unit may not be using the supplied speakers.
To resolve this, check and correct these issues, then unplug and reconnect the power cord before turning the system on again. If the issue persists, service may be required.
This answer is automatically generated