Page 1
FOR USE ONLY WITH THE 56V LITHIUM-ION POWER HEAD PH1400E OPERATOR'S MANUAL BRUSHCUTTER ATTACHMENT MODEL NUMBER BCA1200 WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference.
Page 2
1. End Cap 8. Gear Case 2. Brushcutter Shaft 9. Shaft-locking Hole 10. Outer Flange 7. Sealing Screw 11. Multi-Function Wrench 12. Hex Wrench 3. Guard 4. Blade 5. Blade Sheath 6. Clamp Wire 13. Guard Accessory (For use with trimmer head ONLY)
SAFETY INSTRUCTIONS This page depicts and describes safety symbols that may Noise Sound pressure level appear on this product. Read, understand, and follow all NOISE dB instructions on the machine before attempting to assemble and operate it. BRUSHCUTTER ATTACHMENT — BCA1200...
◾ ◾ The distance between the machine and bystanders Use Safety Glasses - Always use safety glasses while shall be at least 15m. operating the machine. BRUSHCUTTER ATTACHMENT — BCA1200...
Page 7
Blade thrust is more likely to occur in areas where it ◾ is difficult to see the material being cut. Avoid Accidentally Starting - Don’t carry the brushcutter with your finger on the trigger. BRUSHCUTTER ATTACHMENT — BCA1200...
Brushcutter Blade ABB1203 ◾ Replacement Parts - When servicing, use only identical EGO replacement parts. Use of any other accessory or attachment may increase the risk of injury. DESCRIPTION ◾ Battery tools do not have to be plugged into an electrical outlet;...
POWER HEAD Make sure that the internal surface of the guard This brushcutter attachment is designed for use with EGO faces towards the brushcutter head (Fig. C). Power Head PH1400E. 2. Lock the guard in place with the bolts and the See “INSTALLING AN ATTACHMENT TO THE POWER...
(performed by a qualified service technician) or replace it with a new blade when necessary. WARNING: The higher the cutting attachment is off the ground, the greater the risk of injury from cuttings being thrown sideways. BRUSHCUTTER ATTACHMENT — BCA1200...
4. Tighten the sealing screw after injection. When the blade becomes dull, both of the edges of the blade are dull, please sharpen it performed by a qualified service technician or replace with a new blade as necessary. BRUSHCUTTER ATTACHMENT — BCA1200...
Do not store into the food chain, damaging your health the unit on or adjacent to fertilisers, petrol, or other and well-being. chemicals. BRUSHCUTTER ATTACHMENT — BCA1200...
Brushcutter fails to ◾ ◾ start. The battery pack is depleted. Charge the battery pack with EGO chargers listed in this manual. ◾ ◾ The lock-off lever and trigger are not Press down the lock-off lever and hold depressed simultaneously.
New Zealand 0508 000 EGO (0508 000 346) any time you have questions or warranty claims. LIMITED SERVICE WARRANTY FOR FIVE YEARS from the date of original retail purchase, this EGO product is warranted against defects in material or workmanship. Defective product will receive free repair.
Need help?
Do you have a question about the BCA1200 and is the answer not in the manual?
Questions and answers