HITEC Aurora 9 Manual

HITEC Aurora 9 Manual

9 channel 2.4ghz aircraft computer radio system
Hide thumbs Also See for Aurora 9:

Advertisement

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
Introduction
Welcome to the Aurora experience!
The Aurora 9 is Hitecs most sophisticated R/C transmitter and allows the user to choose between 72MHz FM,
Hitecs QPCM and our new "Advanced Frequency Hopping Spread Spectrum" AFHSS 2.4GHz signal technology.
Hitec developers worked hard to deliver the easiest to program, most flexible 9 channel radio ever made.
The Aurora will fly almost any airframe conceived, heli, glider, glow, gas or electric powered plane. Best of all,
the programming is very rational and follows an extraordinary logical path.
We sincerely encourage you to read at least the first couple sections of the manual, as they contain invaluable
information created to make your experience with the Aurora a pleasant one.
Content Disclaimer
Please note that Hitec reserves the right to make production changes during the life of our product lines that
may impact the information in this manual.
For the most up-to-date information on this and any other Hitec product, visit our web site at www.hitecrcd.com.
Hitec RCD Inc.
R/C Controller
Model No : AURORA9
P O W E R : 1. Poser supply from the AC/DC Adapter
Serial No : NONE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
input - AC 100 V~240V: 50Hz/60Hz
Output - TX : DC 7.2V : 80mA
RX : DC 4.8V: 80mA
2. Rechargeable Battery : Lithium-ion
Manufacturer : HITEC RCD PHILIPPINES, INC
Made in Philippines
2
9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM

Table of Contents

Section One
Introduction
2 - - - - -
Introduction
3 - - - - -
Table of Contents
6 - - - - -
Steps for Aurora Programming Success
Using this Manual
7 - - - - -
What's New?
8 - - - - -
Product Support
9 - - - - -
System Component Specifications
9 - - - - -
10 - - - - -
Icon Identification
11 - - - - -
Warnings
13 - - - - -
14 - - - - -
SPECTRA PRO 72MHz FM PPM / 72MHz QPCM
15 - - - - -
Hitec 2.4GHz System Set-up
SPECTRA2.4 2.4GHz Module Features
Optima Series Receiver Features
18 - - - - -
Range Check Function
ScanMode Set-up
Failsafe
Telemetry System
22 - - - - -
Aurora Transmitter Accessories
23 - - - - -
Aurora Transmitter Controls
27 - - - - -
The First Screen
Multi-I/O port
28 - - - - -
Home Screen Menu
Section Two
Quick Start Guide to setting up a simple powered airplane or glider.
30 - - - - -
System Menu Programming
34 - - - - -
Model Menu Programming
Section Three
Quick Start Guide to setting up a Heli.
38 - - - - -
System Menu Programming
41 - - - - -
Model Menu Programming
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Aurora 9 and is the answer not in the manual?

Questions and answers

Summary of Contents for HITEC Aurora 9

  • Page 1 Welcome to the Aurora experience! Section One The Aurora 9 is Hitecs most sophisticated R/C transmitter and allows the user to choose between 72MHz FM, Hitecs QPCM and our new “Advanced Frequency Hopping Spread Spectrum” AFHSS 2.4GHz signal technology. Introduction Hitec developers worked hard to deliver the easiest to program, most flexible 9 channel radio ever made.
  • Page 2 9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM 9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM Section Four Section Six Model Menu System Menu Common Model Functions to ACRO and GLID 47 - - - - - MDL Select Create a new model 86 - - - - - FLT.COND Flight Conditions...
  • Page 3 5. Gimbals Warning Caution Feel the silky smooth action of the new four ball bearing supported gimbals in the Aurora 9. These new gimbals were Note Here’s a sample created to give you the smoothest action demanded by the highest performance aircraft.
  • Page 4 Current Drain : 300 mA Hitec Web Site Make plans to visit the Hitec web site on a regular basis, www.hitecrcd.com or www.hitecaurora.com. It is full of specs Optima 2.4GHz Series Receiver and other information about the entire Hitec product line, and our FAQ pages will eventually hold valuable information Rx.
  • Page 5 9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM 9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM Icon Identification Safety Information Icon Identification Flying models can be dangerous if proper safety precautions are not followed. Here are a few critical safety suggestions to keep you and others safe. MODEL The model menu contains the model programming for the active model.
  • Page 6 Turn the mixes off to proceed. In flight warnings * Warning: During the Aurora 9's charging process, turn off the transmitter power If the transmitter should start a continuous beeping during a flight, land immediately and evaluate the cause of the warning.
  • Page 7 Mode set-up. Receiver Compatibility When used in the Aurora, the SPECTRA PRO will fly models using any brand of 72MHz FM PPM receiver, or the Hitec QPCM receiver. 3. Sensor Data Output and System Upgrade Connector Port A 3 pin servo plug connector port is featured on the 2.4GHz module. Using the HPP-22 PC interface accessory this port serves to...
  • Page 8 2.4GHz 7 Channel Aircraft Receiver 2.4GHz 7 Channel Aircraft Receiver 2.4GHz 7 Channel Aircraft Receiver DATA The Optima series receivers are compatible with transmitters using the Hitec AFHSS 2.4GHz system Spectra 2.4GHz module or 2.4GHz Engine dedicated non-module AFHSS Hitec transmitters in the future.
  • Page 9 - In the Normal mode, if the transmitter or receiver loses power, then power is restored, the system will re-link and function normally. Your Hitec AFHSS system uses a communication protocol that links and binds the Optima receiver to your Aurora transmitter. Once their - The factory default setup is Normal Mode.
  • Page 10 Turn the system back on to use it. Note; some Hitec servos are rated to be used at 7.4Volts. You will still need to supply power for your servos with a four or five cell NiMH receiver battery, 2 cell Li-Po and regulator set-up, or a commercially available BEC. The SPC system was partially - If FAIL-SAFE is deactivated, the FAIL-SAFE position settings are also deleted! created to be integrated into future Hitec telemetry system devices.

Table of Contents

Save PDF