Ready2Talk PA 64 Installation & Operation Manual
Hide thumbs
Also See for PA 64:
- Installation & operation manual (12 pages) ,
- Replacement manual (2 pages) ,
- Setup instructions (2 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Ready2Talk PA 64
Summary of Contents for Ready2Talk PA 64
- Page 1 PA 64 Installation & Operation Manual The PA for ALL applications!
- Page 2 PA 64. Remember point one… the PA 64 goes between the stereo and the speakers! • The PA 64 is an amplifier and is NOT designed to be used with ANY other amplifiers (e.g. being connected between the stereo and amplifier).
- Page 3 Now with the important warnings out of the way… The PA 64 is designed to be the best unit for all applications, offering a real amplifier with 4x50Watts (peak), solid state mic / stereo switching and variable muting for both the rear RCA input and the front 3.5mm AUX input.
- Page 4 Stereo Connection Options Diagram 1 – Connection to Aftermarket Stereo RCA Output Note: Set Input Switch on PA 64 to “Low” Note: When using RCA cables the stereo’s speaker wires are not connected to the PA 64 or the speakers.
- Page 5 Red 12V + Accessory power – Internal automatic re-settable fuse Note: Never increase the value of the fuse as damage may occur. Note: The 4 x 50 Watt amplifier inside the PA 64 is designed to accommodate a 4 – 8 Ohm floating speaker load.
- Page 6 Speaker Connection Options - Based on 4 Ohm Speakers Normal 4 Speaker Option Cutaway Bus 6 Speaker Option Using Drivers Speakers Cutaway Bus 8 Speaker Option with Door Speakers...
- Page 7 Bus 8 Speaker Option Bus 10 Speaker Option...
- Page 8 Bus 12 Speaker Option Bus 16 Speaker Option...
- Page 9 3. Turn off the mic and turn on the stereo, adjust the radio volume as normal to desired level. 4. Turn the “Audio Mute” control on the front of the PA 64 to half way / 50%. (nothing will happen yet) 5.
- Page 10 RME (Rear Mic Extension) A small flush mounted plate with a 4 pin mic socket and 15 ft. cable that connects to the back of the PA 64 and offers a second mic input when you want to have a step on guide.
- Page 11 PA 64 Spec Sheet High Level Input 12VPP (peak to peak) Low Level Input 450mV AUX Input 400mV Microphone Input 100mV Current Drain (Max) 12V Constant Power (Yellow Wire) 10Amp 12V Switched Power (Red Wire) 250mA Total Current Drain at Normal Volumes 2.5Amp...
- Page 12 For more information find us at www.ready2talkpa.com or give us a call at 1 888 724-5351 Double E Products Ltd Box 16118 / 1199 Lynn Valley Rd North Vancouver BC V7J 3S9 Canada 1 888 724-5351 www.ready2talkpa.com info@ready2talkpa.com...
Need help?
Do you have a question about the PA 64 and is the answer not in the manual?
Questions and answers