Advertisement
IL Charge Corona
Disconnect CN2 (2p) on the CTB power pack.
Slide the drum shoe [A] to its rear limit as shown (X).
Position the drum shoe so that the axis of shoe is aligned with the
charge corona wire [B] as shown.
4
Re-install the drum stay [C] (1 screw, 1 knob) and the charge corona
unit [D].
5
Turn on the main switch, press the 10 key "18", and press the "Start" key.
Note the reading, and then press the "C/S" key.
Move the drum shoe to the front as shown (Y)
and repeat steps 4 to 7.
j
3-55
1 Nov. '87
Advertisement
Need help?
Do you have a question about the FT3320 and is the answer not in the manual?
Questions and answers