Mirrors - BRP Can-Am Ryker 900 ACE (Rally Edition) 2019 Operator's Manual

EQUIPMENT
All Other Countries
219001998-509
FRONT OF VEHICLE
1. Headlight - low beam
2. Headlight - high beam
3. Turn signal lights/position lights
219001998-510
REAR OF VEHICLE
1. License plate light
2. Brake lights
3. Turn signal lights/tail lights
4. RED reflectors

Mirrors

Each mirror can be adjusted to suit
driver's preference by gently rotating
it.
NOTICE
Do not try to turn the mir-
ror arm. It must remain oriented ver-
tically (upwards).
WARNING
Do not adjust the mirrors while the
vehicle is in motion.
______________
30
219001998-029
Repositioning the Mirror Support
It may happen that the support be-
comes loose and lower during the
use of the vehicle. Do the following
to reposition and secure the support
correctly.
1. Loosen the
screw about
(3/8 in to 1/2 in).
NOTICE
To avoid losing parts, do
not remove the screw completely.
219001998-115
A. 10 mm to 13 mm (3/8 in to 1/2 in)
2. Hit the screw to push it inward and
release the support retainer mecha-
nism.
3. Fully push the support against the
handlebar.
4. Position the mark on the support
perpendicularly with the ground.
mirror support
10 mm to 13 mm
A