Related Manuals for JVC DT-U31
Summary of Contents for JVC DT-U31
- Page 1 MULTI FORMAT LCD MONITOR DT-U31 DT-U27HB DT-U31PRO INSTRUCTIONS For Customer Use: Please read the Instruction Manual carefully and retain this information for future reference. Version: B...
-
Page 2: Safety Precautions
Safety Precautions The lighting flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence of uninsulared “dangerous voltage” RISK OF ELECTRICAL SHOCK within the product’s enclosure that may DO NOT OPEN be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 3 Safety Precautions (cont.) Under the following conditions, • Make enough room for inserting or removing the power plug. Turn off the power. Place the product as close to an AC outlet as possible. The 2. Unplug this product from the wall outlet. main power supply for the product is controlled by inserting or 3.
-
Page 4: Operating Precautions
Operating Precautions IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 5: Table Of Contents
Table of Contents Safety Precautions ............2 IMPORTANT SAFEGUARDS Operating Precautions . -
Page 6: Installation
Installation Do not rest your arm on the monitor or lean against the monitor. Do not touch the LCD panel when installing the monitor. Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. Using the monitor on U-stand The monitor package provides a U shape rotatable desktop stand to be installed. -
Page 7: Index Of Parts And Functions
Index of Parts and Functions Rear panel SFP terminal Input terminal for 12G/6G/3G/HD/SD-SDI SFP optical ber receiver adaptor. The SFP adaptor is optional purchased. E. AUDIO SDI (OUT) terminal (BNC) Output terminal for the SDI IN1 or SFP IN signal, supports 12G/6G/3G/HD/SD. -
Page 8: Front Panel
Index of Parts and Functionos (cont.) Front panel Tally lamp This lamp is controlled by the tally function of the Make contact terminal. ( Page 16.) You can select the color of the tally lamp from "Green", "Red", or "Yellow". 10 11 Speaker: INPUT SELECTION keys... -
Page 9: Showing Input Signals
Showing Input Signals On the Information Display On the Status Display Main Menu Status TC 00:15:13:07 CAMERA 1 Exit&Status Channel ＞ Format Picture Adjustment ＞ Video Lumina Range XXXX Signal and Color ＞ YUV Color Matrix XXXX Signal Scanning ＞ Processing Color Space Tool &... -
Page 10: The Operation Procedure
The Operation Procedure Note Press the “MENU” button to display the Main Menu. The items in gray means not available Press “ ” and “ ” to select submenu, the selected submenu highlights in yellow; to set up. Press “ ”... -
Page 11: Main Menu
Select a Camera log or User log to convert to Rec. 709. Only available under Rec. 709 color gamut. *2 SoftClip 3DLut.cube Re-calibrated 3DLUT cube The SoftClip is for DT-U31 and DT-U31PRO to simulate Log cubes Camera Logs to Rec709 3DLUT cube PQ1000 HDR image： User-Log.cube... - Page 12 The monitor support the following probe models: The monitor will not be calibrated until process reaches 100%. Brand Model X-rite i1 DISPLAY EODIS3-DCOE (JVC dedicated version) JETI Specbos 1211 *9 Measure *8 Start Calibration The monitor has been calibrated in factory. And may need to be re-calibrated after a period of time.
- Page 13 Signal Scanning Setting for picture scan, zoom, ip, etc. Item To do Setting value Scanning Select a mode to t video to LCD panel Panel Fit, Pixel to Pixel, Native *1 OFF, Top Left, Top, Top Right, Left, Center, Zoom Area Selection Select an area to zoom-in Right, Bottom Left,Bottom, Bottom Right *2 Freeze Frame...
- Page 14 Tools & Information Setting for video/audio analysis functions Item Setting value To do Focus Assist Switch on focus assist mode and select color OFF, Blue, Red Switch on zebra stripes for over exposed image OFF, ON Zebra False Color Switch on false color mode OFF, ON Blue Only Switch on blue only mode...
- Page 15 Audio Setting for Vector scope and Histogram patterns Item To do Setting value Volume adjust volume 0~100 Left Channel Select an audio channel to output left Channel 1~Channel 16 Right Channel Select an audio channel to output right Channel 1~Channel 16 Audio Bar Switch on the audio meter display OFF, ON...
- Page 16 External Control Setting for TALLY, UMD, IP control to the monitor Setting value Item To do Tally Setting Set on-screen tally display mode OFF, ON, Blinking Tally Position Select the display position of on-screen tally Top, Bottom GPI Control Enable GPI control OFF, ON 1 Pin SFP, SDI1,SDI2, SDI3, SDI4, 4xSDI(2SI), 4xSDI(SQ),...
- Page 17 *2 UMD control *3 Webserver IP Control Select UMD mode to “External” will enable TSL UMD control. Connect the monitor ETHERNET port into LAN, and the monitor can be remote controlled by webpage. TallyMan system connection: Pin No Pin name RS485 IN ETHERNET Enter Menu- External Control - IP/Net Mask/Gateway/Port to...
- Page 18 Webserver page control interface After changing settings, please click the Refresh button to see the new status.
- Page 19 System Setting User pro le saving, rmware update Item To do Setting value Global Select a user pro le for all input sources User 1-8, OFF Select a user pro le for SFP input only SDI1 Select a user pro le for SDI 1 input only SDI2 Select a user pro le for SDI 2 input only User 1-8...
-
Page 20: General
Specifications General Model name DT-U31 DT-U27HB DT-U31PRO Multi format LCD monitor Multi format LCD monitor Multi format LCD monitor Type 31.5 ” 27” 31.1” Screen size 16:9 16:9 17:9 Aspect ratio 61.93kHz – 92.9 kHz 61.93kHz – 92.9 kHz 64kHz – 83kHz... -
Page 21: Dimensions
Specifications (cont.) Dimensions Unit: mm 91.5 759.1 DT-U31 773.1 801.1 91.5 657.6 DT-U27HB 671.6 91.5 758.2 DT-U31PRO 772.2 800.2... -
Page 22: Available Signals
Specifications (cont.) Available signals The following signals are available for this monitor. √: Acceptable —: Not acceptable Input terminal Signal format shown in the Status Display as Formats SDI 1 & SFP SDI 2/3/4 Quadlink SDI SDI & SFP HDMI HDMI —... - Page 23 Service Contacts: Importer (EU only) JVCKENWOOD U.K. Limited 12 Priestley Way, London NW2 7BA, UNITED KINGDOM Importeur (Nur EU) JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, DEUTSCHLAND Importatore (Solo EU) JVCKENWOOD Italia S.p.A. Via G. Sirtori 7/9, 20129 Milano, ITALIA Importeur (Alleen EU) JVCKENWOOD Belgium N.V.
- Page 24 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.