Silvercrest SHAC 2100 B1 Operating Instructions Manual page 23

Drying and styling hair
■ To quickly dry hair, we recommend first of all using a high blower and heater
setting for a short period . Also, place the Ionic switch-in 4 at the position
"
shape the hairstyle .
■ With the supplied styling jet 1 you can apply a directed airflow to shape
and style your hair . Start by removing the finger diffuser 9 first with a
downwards snapping motion . Fit the styling jet 1 by pushing it with light
pressure onto the hair dryer so that it snaps into place and sits evenly on the
hair dryer . If you no longer require the styling jet 1, wait until the appliance
has cooled down and pull it off with a downwards snapping motion:
■ If you wish to dry your hair especially gently, or create a so-called "air-dried
wave", then use the finger diffusor 9 . Start by removing the styling jet 1 with
a downwards snapping motion .
Fit the finger diffusor 9 by pushing it with light pressure onto the hair dryer
so that it snaps into place and sits evenly on the hair dryer .If you no longer
require the finger diffusor 9, wait until the appliance has cooled down and
pull it off with a downwards snapping motion:
■ Before you comb your hair out, allow it to cool so that the shaping and styling
can retain its form .
■ You can use the cooling level button 8
■ 20 │ GB │ IE
" . After drying the hair, switch to a lower blower and heat level to
to cool down your hair down .
SHAC 2100 B1