Silvercrest SWV 733 B1 Operating Instructions And Safety Instructions page 66

SilverCrest SWV 733 B1
For the synchronisation to take place, the Dual-Band Range Extender must be connected to the
Internet.
For Time zone, enter the corresponding time zone for your location.
Select a specified NTP server in the NTP server field.
Click on the Apply button to apply the changed settings.
LED on/off
The LEDs of the Dual-Band Range Extender can be switched on or off. This does not affect the
power LED (6), this cannot be switched off.
If the Off setting is selected, the LEDs only light up once a fault occurs.
For this purpose, you can set the switch for LED on/off to On or Off.
64 - English