Programming The Electricity Tariff 1 And - Silvercrest Z30412-IT Operating Instructions And Safety Advices

©
Note: You can set two different electricity
tariffs on this energy cost meter. To use
this function you have to set the start
times for tariffs 1 and 2.
IMPORTANT! Tariff 1 is automatically
the first tariff to be programmed.
Example: If the energy cost meter is
programmed during the night the current
night tariff is programmed as tariff 1.
If the energy cost meter is programmed
during the day the current day tariff is
programmed as tariff 1.
Note: The LC display
the basic mode (voltage display) auto-
matically if about 1 minute passes during
programming without you pressing a
button.
184 GB/MT
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 184 25.05.11 12:21
Programming the
electricity tariff 1 and 2
1 switches into