Preparing The Projector - Sony VPL-CX125 Network Operating Instructions

Projector Station for Air Shot Version 2
starts up automatically.
When you are not going to project the
pictures, click [OK].
After executing [AutoConfig.exe], start up
the application with [PjstnASv2.exe].
When you change the computer, execute
[AutoConfig.exe].

Preparing the Projector

Setting the projector
1
Connect the network cable to the
NETWORK connector of the
projector.
2
Turn on the projector.
3
Press the INPUT C or AIR SHOT key
on the remote commander.
The home display of the network
presentation appears.
Serial number
Model name
Nick name (only
when specified)
Operations
guide
Icon
Icons representing network status:
being not connected
being connected
Mode
IP address
7
Preparation