Adapters For Danfoss - Silvercrest Classic Model L Operating Instructions And Safety Advices

18 GB
91033_silv_Heizkoerperthermostat_Content_RO.indd 18

Adapters for Danfoss

Take care during installation that you do
not trap your fingers between the two halves
of the adapter!
One of the enclosed adapters is required for
installation on Danfoss valves. The arrangement
of the suitable adapter ring for the appropriate
valve can be found in the figures C–F.
The Danfoss valve bodies have elongated
indentations
13
also ensure better seating of the adapter
after it has been latched into place.
Note: When installing, please ensure that
the spigots inside the adapter
same position as the indentations
valve.
Screw the adapter, which fits the valve,
onto the valve until it clicks into place.
running all around, which
14
are in the
on the
13
09.07.13 11:08