Connecting The Electrical Appliance To Be Tested - Silvercrest 56861 Instruction Manual

Q 
Q 
c
SHOCK! Only measure voltages of over 25 V ~ in compli-
ance with the relevant safety instructions for the electrical
appliance you wish to test.
m
stated maximum input voltage.
j 
j 
Q 
j 
56861_Energiekostenmessgeraet_Content_GB-HU-SI-DE.indd 17
Operation
Connecting the electrical
appliance to be tested
CAUTIOn! rISK OF FATAL InJUrY BY ELECTrIC
CAUTIOn! rISK OF InJUrY! Never exceed the
P lug the wattmeter into a suitable outlet.
N ow plug the mains plug of the electrical appliance you
wish to test into the socket 6 of the wattmeter.
Current measurement
P ress the "UP" button 5 until the Ampere symbol 9
appears in the top third of the LC display 1 .
note: the "Current measurement" function is the stand-
ard setting for the wattmeter. As soon as the isolating
strip between the two round cell batteries is removed,
the wattmeter is automatically in this mode.
Operation
GB 17
30.11.10 14:12