Troubleshooting - Parkside PBH 1500 F6 Original Instructions Manual

7. Troubleshooting

Problem Possible cause
The drill does not start. Damaged cable.
Fuse tripped.
Carbon brushes worn out. Have the carbon brushes checked by customer
Trigger defective
Poor drilling Drill bit is blunt.
performance.
Chuck turns or does Function selector switch in
not turn. the wrong position.
Hammer mode on Function selector switch in
or off the wrong position.
Rectification
Have the cable replaced by a service center.
Check the household fuse box
service
Have the trigger switch checked by customer
service
Sharpen or replace the drill bit.
Check if the function selector switch is in the
position suitable for your application.
Check if the function selector switch is in the
position suitable for your application.
13