Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HTC D60
Summary of Contents for HTC D60
- Page 1 MANUAL MANUAL HTC D60 Translation of manual from original language...
- Page 3 Always specify the model and serial number when asking questions about your machine. Trademarks HTC is a trademark owned by HTC Sweden AB. Other names and products mentioned in this man- ual may be registered trademarks owned by the relevant companies.
- Page 4 HTC D60 EC Declaration of conformity Manufacturer: HTC Sweden AB Box 69 SE-614 22 Söderköping, Sweden +46 (0)121-29400 Type of equipment: Dust extractor Make: Model: HTC D60 Year of manufacture: See machine name plate Serial number: See machine name plate Original of the EC declaration of conformity (Swedish).
-
Page 5: Standards
HTC D60 1. Standards As the manufacturer, we hereby declare under our sole responsibility that the above product with serial numbers from 2017 onward conforms to the applicable regulations in: Standard Description Houshold and similar electrical appliances - Safety - Part 1: General re-... -
Page 6: Table Of Contents
HTC D60 Table of contents Standards Introduction General information Liability Manual Machine name plate Machine description General information Machine overview Transport & storage Handling and storage Transport & lifting Operation Safety General information Various positions of the pre-separator & dust extractor... -
Page 7: Introduction
Even though every effort has been made to make this manual as complete and accurate as possi- ble, we bear no responsibility for incorrect or missing information. HTC reserves the right to change descriptions in this manual without giving prior notice. -
Page 8: Machine Name Plate
HTC D60 2.4 Machine name plate The machine name plate provides the following information. The model and serial number must be specified when ordering spare parts for the machine. Model : Part no : Serial no : MFG Date :... -
Page 9: Machine Description
The pre-separator can be raised and lowered with a simple movement and easily removed from the chassis if necessary. The dust extractor can also be controlled from HTC DURATIQ grinder. www.htc-floorsystems.com V 1.0... -
Page 10: Machine Overview
HTC D60 3.2 Machine overview Pos. Description 3” camlock inlet connection Pre-separator Fine filter Bypass valve Inlet valve Control cabinet with control panel Parking brake Side duct fan Filter cleaning valve Coarse filter container Bag connection with lip valve V 1.0... -
Page 11: Transport & Storage
HTC D60 4. Transport & storage 4.1 Handling and storage The dust extractor should be stored in a heated, dry area when not in use. Otherwise it may be damaged by condensation and cold. The dust extractor's dimensions and weight are given in chapter Technical data. -
Page 12: Operation
HTC D60 5. Operation 5.1 Safety This chapter contains all the warnings and notes that must be considered for the dust extractor. 5.2 General information Warning! Use protective equipment such as safety shoes, safety goggles, pro- tective gloves, mouth mask and hearing protection. -
Page 13: Control Panel
HTC D60 5.4 Control panel Icon Function Description Indicates flow (m³ or cfm). Display Indicates pressure (total pressure mbar or in Aq). Filter status, 0% clean filter, 100% blocked filter. Starts up or places the machine in standby mode. The machine wakes up when power is supplied. To place On/Standby the machine into standby mode, hold the button in. -
Page 14: Display Use Menu
HTC D60 5.5 Display use menu Use the up or down arrows to change display mode. Icon Function Description Service Service Dust emptying Dust emptying Filter cleaning Filter cleaning Direction of rotation Direction of rotation Automatic Automatic Lighting Lighting Time and date Time and date Indicates flow in (m³... -
Page 15: Dust Filtration
HTC D60 5.6 Dust filtration Hose connection The suction system is equipped with a 3" connector for quick, easy and safe connection of the suction hose between the grinding machine and dust ex- tractor or other accessories that are to be used for dust collection. - Page 16 HTC D60 When the valve is closed, the dust falls into the space down into the bag and if the bag is full, it can now be replaced. When the valve is closed, the dust is not separated but instead continues directly to the coarse filter contain- er.
-
Page 17: Filter Cleaning
HTC D60 5.7 Filter cleaning Icon Name Description Closes the inlet valve to build up a negative pressure in the Button 1 coarse filter container Button 2 Opens the cleaning valve to clean the coarse filter To clean the coarse filter, hold button 1 in so that the inlet valve closes and the airflow into the coarse filter container ceases. -
Page 18: Replacing The Dust Bag
5.8 Replacing the dust bag The dust extractor is equipped with a bag system that makes it possible to minimise dust exposure when changing dust bags. This bag system can be ordered. Please contact your HTC retailer. Warning! Use protective equipment such as safety shoes, safety goggles, protective gloves, mouth mask and hearing pro- tection. -
Page 19: Display Information Menu
HTC D60 5.9 Display information menu MENUS TIME/DATE Time and date settings Metric m³/h & mbar UNITS Imperial CFM & in Aq 50Hz FREQUENCY For calculating flow 60Hz SETTINGS Auto Purge AUTO ON/OFF Purge Time 3/5/10/15/20/30 MIN FILTER PURGE Filter Status 50% —... -
Page 20: Accessories
HTC D60 6. Accessories 6.1 Automatic filter cleaning Automatic filter cleaning automatically cleans the dust extractor's coarse filter when it becomes blocked. This occurs by electromagnets connecting to buttons 1 and 2, whereupon the dust ex- tractor's control panel can perform filter cleaning automatically or via a button push. Filter cleaning occurs when one or more of the following conditions are met: •... -
Page 21: Remote Control
HTC D60 6.2 Remote control DURATIQ Remote Connection connects the dust extractor to a DURATIQ grinding machine. To pair a dust extractor and DURATIQ grinding machine go to Radio System in the menu and select the same ID in the grinding machine and dust extractor. -
Page 22: Maintenance
HTC D60 7. Maintenance 7.1 General information We recommend regular inspection of the dust extractor. Warning! During maintenance and repair work, the machine must be discon- nected from the mains power supply. Warning! Use protective equipment such as safety shoes, safety goggles, protective gloves, mouth mask and hearing protection. -
Page 23: Weekly Maintenance
HTC D60 7.4 Weekly maintenance Check for leaks • Place your hand over the inlet and make sure it goes up to 370mbar. Check pre-separator • Inspect sealing strips and surfaces for cracks or damage. • Check for unusual dust build up. -
Page 24: Filter Replacement
HTC D60 7.5 Filter replacement Warning! The dust that is sucked up may be harmful if inhaled. Follow local regulations and use breathing protection. To check the filter, start by disconnecting the hose to the fine filter and checking in the hose con- nection for dust on the inside of the fine filter. -
Page 25: Control Cabinet
HTC D60 7.6 Control cabinet Designation Description Designation Description Contact Contact (Black, Y) (Clockwise) Contact (Opera- Contact tion, D) (Counter clockwise) Motor protection Fuse 4A 24V DC Miniature circuit USB Port breaker Control panel Power supply www.htc-floorsystems.com V 1.0... -
Page 26: Service
8. Service 8.1 Repairs Any repairs that may be required must be carried out by a HTC Service Centre that has trained ser- vice personnel and uses HTC original parts and accessories. Contact your retailer if your machine requires servicing. For contact information, see Contact Information at the start of the manual. -
Page 27: Function Checks
HTC D60 8.4 Function checks Check point Action The dust bags Check that the bags are intact The lip valves Check that they are not damaged Plug the inlet and check on the display that a negative pressure is reached. -
Page 28: Troubleshooting
HTC D60 9. Troubleshooting This chapter describes some of the errors that may occur and how to deal with them. If the error cannot be corrected, or if errors arise other than those described here, contact your nearest retailer. See Contact Information at the front of the manual. -
Page 29: Warnings And Error Messages
HTC D60 9.1 Warnings and error messages Warnings Warnings appear on a yellow background at the top of the screen. A warning does not usually stop operation but the machine may have restricted functionality. Actions to ensure operation may need to be taken. - Page 30 HTC D60 Error Message Error messages appear on a red background at the top of the screen. An error usually stops one or more functions of the machine. Action may need to be taken to resume operation. Error Message Description...
-
Page 31: Technical Data
HTC D60 10. Technical data The tables and pictures below show the technical data and dimensions for the dust extractor. HTC D60 160601 160602 160603 5.5kW 6.3kW Motor power 7.5 hp 8.5 hp Current 30 A 15 A Frequency 50Hz – 60Hz 60Hz 180 –... - Page 32 HTC D60 Height and length of the dust extractor, in the operating position and transportation position. Dimensions 1920 mm 1400 mm 1235 mm 680 mm 75.6” 55.1” 46.6” 26.8” V 1.0 www.htc-floorsystems.com...
-
Page 33: Environment
HTC D60 11. Environment HTC products are mainly constructed of recyclable metal and plastic. The main materials used are listed below. Chassis Machine part Material Waste management Frame Metal, powder-coated Metal recycling Front wheels Metal, plastic and rubber Metal recycling... - Page 34 Head office HTC Sweden AB HTC Floor Systems Ltd. Box 69 Unit 4 Kingston Business Park SE-614 22 Söderköping Dunfermline Court Sweden Maidstone Road Kingston Street (delivery) address: Milton Keynes Klevvägen 7 MK10 0BY SE-614 92 Söderköping United Kingdom Sweden Tel.: +46 (0)121-29400...
Need help?
Do you have a question about the D60 and is the answer not in the manual?
Questions and answers