Honda Click 125i 2019 Owner's Manual page 36

Anti-theft Alarm System
#
Cancelling the Anti-theft Alarm System
Press the UNSET button or turn the ignition
switch to the (On) position.
When UNSET button is pressed, the turn
signal light blinks, the alarm indicator blinks,
and the alarm sounds for 2 times.
The buzzer sound can be cancelled using
temporary silence mode.
#
Temporary Silence Mode
UNSET button
#
Stopping the Anti-theft Alarm Activation
To stop the anti-theft alarm activation, do one
of the following:
• Press the UNSET button.
• Turn the ignition switch to the (On) position.
32
(Continued)
After stopping the anti-theft alarm activation,
the anti-theft alarm system will be cancelled.
UNSET button
#
Adjusting the Sensitivity of Anti-theft
(P38)
Alarm System
(On)
You can select 3 sensitivity levels of anti-theft
alarm system.
!a
!b
Turn the ignition switch to the
position.
Repeat this step 3 times as follows:
Turn the ignition switch from the
position to the (On) position and press SET
button on remote transmitter 2 times.
Then turn the ignition switch from the
position to the (On) position within 5
seconds.
(On)
(Off)
(Off)
(Off)