General Description; Specifications; Mig; Spool Gun Bracket - Sherman DUALMIG 210 S3 User Manual

3. GENERAL DESCRIPTION

Semi-automatic welding machines DUALMIG 210 210 DUALMIG S3 and S4 are used for manual welding of steel and non-ferrous metals. Allow for MIG
/ MAG, MMA (coated electrode) and Lift TIG. They may also be used to braze thin (3mm) galvanized sheets. By changing the polarization devices allow
welding MIG / MAG welding with the use of standard wire in the protective gases and the self-shielded flux cored wires. Welding machines are used in
confined spaces or covered, if directly exposed to weathering. DUALMIG S3 210 cooperates with the wire spools D200 (5kg) and D300 (15kg) and 210
DUALMIG S4 spools D100 (1kg) and the D200 (15kg).
DUALMIG S3 210 allows the connection of the handle Spool-type gun (SG) which is mounted at the mini wire feed reel and D100 steel wire or
colored, so that welding can be two different wires without the need for retooling welder. It is a time-saving solution for the need for welding different
materials or different thicknesses up casual use of wires.

4. SPECIFICATIONS

4.1 welder
Power supply:
Rated welding current / cycle
Range of welding current
The adjustment range of welding voltage (MIG)
Spool of wire diameters:
Maximum current consumption
Maximum power consumption
Mass:
dimensions:
Level of security

4.2 MIG

handle type
The maximum current carrying capacity
Type of cooling
The cooling gas flow
Length
4.3 Spool Gun Bracket (optional)
http://tecweld.pl/downloads/uchwyt-spool-gun-m-15-ulotka.pdf
handle type
The maximum current carrying capacity
The recommended diameter of the welding wire
Wire feed speed
Length
DUALMIG 210 S3
MMA: 180 A; TIG: 180 A; MIG 200 A / 60%
MMA: 30-180 A; TIG: A 30-180; MIG: 35-200 A
200 mm, 300 mm
19.5 kg
782 x 252 x 345 mm
shielding gas
Gun spool 15 (MTMSG3M)
150 A
0.6-1.0 mm
1-13 m / min
3 m
4
DUALMIG 210 S4
AC 230V 50Hz
15 - 23 V
100 mm, 200 mm
25 And
8.5 kVA
11.5 kg
450 x 210 x 305 mm
IP21S
TW-15
200 A
10-18 l / min
3 m
-
-
-
-
-