Related Manuals for Pentair SEP 100
Summary of Contents for Pentair SEP 100
- Page 1 SEP 100 ® D.E. SEPARATION TANK INSTALLATION AND USER’S GUIDE IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS...
-
Page 2: Table Of Contents
CUSTOMER SERVICE / TECHNICAL SUPPORT If you have questions about ordering Pentair Aquatic Systems replacement parts, and pool products, please contact: Customer Service and Technical Support, USA Sanford, North Carolina (8 A.M. to 5 P.M. ET) (8 A.M. to 5 P.M. — Eastern/Pacific Times) -
Page 3: Important Warning And Safety Instructions
Pressurized This guide provides installation and operation instructions for air can cause the lid to separate which can result in this product. Consult Pentair with any questions regarding this severe injury, death, or property damage. equipment. - Page 4 As a result of following these instructions and taking the necessary preventative care, you can expect maximum efficiency and life from your filtration system. SEP 100 D.E. Separation Tank Installation and User’s Guide ®...
-
Page 5: Installation
Call US: (877) 347-4788 - INT: (407) 886-3939 for additional free copies of these instructions. Separation Tank Installation 1. The Sep 100 D.E. Separation Tank should be mounted on a level concrete slab. Position the tank so that the instructions, ®... -
Page 6: Operation
6. Be sure that the separation tank is properly mounted and positioned according to instructions provided. General Information 1. The Sep 100 D.E. Separation Tank operates under pressure. When the lock ring is installed properly and operated ®... -
Page 7: Lock Ring Installation
Lock Ring Installation These instructions MUST BE FOLLOWED EXACTLY to prevent the lid from separating from the tank during system restart or later operation. THE SEP 100 D.E. SEPARATION TANK OPERATES UNDER HIGH PRESSURE. WHEN ANY PART OF THE CIRCULATING ®... -
Page 8: Maintenance
2. Open the High Flow™ Manual Air Relief Valve, (and the waste drain valve, or cap, if your system has one). 3. Remove hair and lint strainer pot lid and clean basket. Replace basket and secure lid. 4. Open the drain valve and wait for the water to drain from the Sep 100 D.E. Separation Tank before removing the bag ®... -
Page 9: Troubleshooting
2. The pressure gauge should indicate pressure when the system is operating. 3. The pressure gauge should be readable and not damaged in any way. 4. Replace the pressure gauge immediately if it fails to meet any of the requirements above. SEP 100 D.E. Separation Tank Installation and User’s Guide ®... -
Page 10: Replacement Parts
Separation Bag Retaining Ring 178731Z Tank Bottom, Almond 178743Z Tank Bottom, Black 154712 Drain Cap Assembly 178732Z Union Nut “C” Clip U11-200PS Union, Nut 178746Z Union, Diamond Seal 178733Z Union, Threaded Half SEP 100 D.E. Separation Tank Installation and User’s Guide ®... - Page 11 NOTES...
- Page 12 Unless expressly noted, names and brands of third parties that may be used in this document are not used to indicate an affiliation or endorsement between the owners of these names and brands and Pentair Water Pool and Spa, Inc. Those names and brands may be the trademarks or registered trademarks of those third parties.
Need help?
Do you have a question about the SEP 100 and is the answer not in the manual?
Questions and answers