Download
Share
Print this page
HP Z8 G4 Product End-Of-Life Disassembly Instructions
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Desktop
  5. Z8 G4
  6. Product end-of-life disassembly instructions
HP Z8 G4 Product End-Of-Life Disassembly Instructions

HP Z8 G4 Product End-Of-Life Disassembly Instructions

Hide thumbs Also See for Z8 G4:

Advertisement

Quick Links

Download this manual See also: Maintenance and Service Manual
Product End-of-Life Disassembly Instructions
Product Category: Workstations
Marketing Name / Model
[List multiple models if applicable.]
HP Z8 G4 Workstation
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for
the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code
on the plastic part. For any questions on plastic marking, please contact
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
Yes
All types including standard alkaline and lithium
coin or button style batteries Yes
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Eldorado1450W PSU
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
HP's Sustainability
Contact.
EL-MF877-01
Quantity
of items
included
in product
5
1
9
Page 1

Advertisement

loading

Related Manuals for HP Z8 G4

Summary of Contents for HP Z8 G4

  • Page 1 Marketing Name / Model [List multiple models if applicable.] HP Z8 G4 Workstation Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
  • Page 3 3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). Figure1 Remove the Access Panel Figure2 Remove the PCIe retainer Figure3 Remove the memory fan duct Figure4 Remove the Personality Module Guide.
  • Page 4 Figure5 Disconnect the PCIe power cable from PCIe fan Figure6 Disconnect the front middle chassis fan cable guide. Figure7 Disconnect the front lower chassis fan cable Figure8 Remove the PCIe fan guide from chassis Figure9 Remove the front lower chassis fan from fan Figure10 Remove the front middle chassis fan from fan guide.
  • Page 5 Figure11 All the parts of PCIe fan guide. Figure12 Remove the front upper chassis fan duct. Figure13 Disconnect the front upper chassis fan cable. Figure14 Remove the front upper chassis fan from duct. EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 6 Figure15 Remove the fan guard from fan. Figure16 Detail parts of front upper chassis fan guide assembly. Figure17 Disconnect rear system fan cable from ODD Figure18 Remove the rear system fan cables from hook Figure19 Remove the fan guard from fan guard. Figure20 Disconnect all the SATA cable from MB.
  • Page 7 Figure21 Disconnect the ODD SATA cable from ODD. Figure22 Disconnect the ODD Power cable from ODD Figure23 Release the ODD SATA cable from cable clip Figure24 The ODD SATA cable detail. Figure25 Disconnect the FUI cable from MB. Figure26 Remove the USB3.0 cable from MB. EL-MF877-00 Page 7 Template Revision B...
  • Page 8 Figure27 Disconnect the FUI cable from FIO module. Figure28 Disconnect the USB3.0 cable from FIO module. Figure29 Unclasp the 2pcs cable clip on chassis. Figure30 Remove the FUI and USB3.0 cable from chassis. Figure31 Disconnect the Audio Extension cable from MB Figure32 Disconnect the Audio Extension cable from FIO Module.
  • Page 9 Figure33 Cutoff the cable tie on front upper chassis fan Figure34 Remove the Audio Extension cable from chassis. duct bracket Figure35 Remove the graphic card from MB Figure36 Remove the memory from MB Figure37 Disconnect the CPU cooler cable from MB. Figure38 Remove the CPU cooler from MB.
  • Page 10 Figure39 Remove the CPU and carrier from cooler Figure40 Remove the CPU from carrier. Figure41 Figure38 Remove the fan from CPU cooler Figure42 Detail parts of CPU cooler assembly. Figure43 Drag out the ODD power cable from ODD bay. Figure44 Remove FIO module and ODD filer(x2) and slim ODD from chassis EL-MF877-00 Page 10...
  • Page 11 Figure45 Loosen the screws(x4) of speaker and release Figure46 Disconnect the Speaker cable from FIO module speaker. Figure47 Release the Front Panel Mount cable from clip Figure48 Disconnect the Front Panel Mount cable from FIO Figure49 Release the Front Panel Mount cable by push Figure50 Release the Front Panel Mount cable by push out out 4 pins fixed in FIO tray.
  • Page 12 Figure51 Loose the 4pcs FIO PCA screws Figure52 Remove the SD Card Reader Carrier Figure53 Loose the left and right side hooks of FIO panel Figure54 Loose the 2pcs bottom side hooks of FIO panel Figure55 Details of FIO module Assembly Figure56 Loose the HDD bracket EL-MF877-00 Page 12...
  • Page 13 Figure57 Remove the 4pcs HDD bracket from chassis. Figure58 Remove the HDD from HDD0 bracket by push out the HDD bracket. Figure60 Disconnect the P4 power connector from MB. Figure59 Disconnect the P1 power connector from MB. Figure61 Disconnect the P2 power connector from MB. Figure62 Disconnect the P3 power connector from MB.
  • Page 14 Figure63 Remove the battery from MB. Figure64 Push the MB from the rear side to from and remove the MB out of chassis. Figure65 Remove the PCIe slot cover(x6) from chassis. Figure66 Remove the PSU from chassis Figure67 Cut off the cable tie to fix P3 power cable Figure68 Cut off the cable tie to fix BM SATA and Graphics power cable.
  • Page 15 Figure70 Open and remove right side panel Figure69 Release 2pcs screws of right side panel. Figure71 Cutoff 5 pcs cable tie to fix power cable. Unlock 4pcs screw of PDB. Figure72. Figure73 Unlock 4pcs screw of PDB. Figure74 Disconnect the H1 power cable and BM SATA power cable.
  • Page 16 Figure75 Release the BM STAT connector from Figure76 The details of BM SATA cable chassis Figure77 Release 2pcs latch of top panel. Figure78 Remove the top penal from chassis Figure80 Remove the front panel from chassis Figure79 Release 2pcs latch of front panel on bottom side of chassis.
  • Page 17 Figure81 Push 2pcs inside latch to release hood sensor Figure82 Push 3pcs inside latch to release HDD Deco bracket from chassis. bracket from chassis. Figure83 Unlock the left side screws(2x) front side handle. Figure84 Unlock the right side screws(2x) front side handle. Figure85 Release 1 latch of front side handle pocket.
  • Page 18 Figure87 Details of front side handle pocket Figure88 Remove the left side plastic parts of front side handle pocket by release 2pcs latches. Figure89 The details of left side plastic parts of front side Figure90 Remove the right side plastic parts of front side handle pocket.
  • Page 19 Figure93 Unlock the right side screw of rear handle pocket Figure94 Release 3pcs latches of rear handle pocket Figure95 The detail of rear handle pocket Figure96 Unlock bottom side screw of ODD bracket cover EL-MF877-00 Page 19 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 20 Figure98 Unlock top side screw of ODD bracket Figure97 Remove the bottom side spring of ODD cover bracket cover Figure99 Remove the top side spring of ODD Figure100 The details of ODD bracket cover bracket cover Figure 101 Remove 5pcs PSU case screw Figure 102 Remove 2pcs PSU case screw EL-MF877-00 Page 20...
  • Page 21 Figure 103 Remove 9pcs PCB screw Figure 104 Remove FG wire screw Figure 105 Cut the cable tie for fan wire & CN6 wire Figure 106 Cut the cable tie for fan wire & case chassis Figure 107 Cut the cable tie for CN1/CN2/CN3 wire Figure 108 Cut the cable tie for CN2/CN3 wire EL-MF877-00 Page 21...
  • Page 22 Figure 109 Disconnect CN1/CN2/CN3 connector Figure 110 Disconnect FAN connector Figure 111 Remove component for MAIN PCB Figure 112 Remove component for MAIN PCB (C952/C953/C955/C956/C965diameter or height are (C952/C953/C955/C956/C965diameter or height are more than 25mm) more than 25mm) Figure 113 Remove fan screw EL-MF877-00 Page 22 Template Revision B...