Charging The Batteries - KYMCO K-chair EW10BA Manual

9.2

CHARGING THE BATTERIES

It is imperative that you observe the sequence for
connecting and disconnecting the battery charger.
Be sure to follow the procedures shown below.
1. The wheelchair POWER must be switched "OFF".
2. Connect the charger cord to the power outlet.
3. Locate the charging socket on the joystick then
connect the charger's plug to the charging socket.
4. The charger's LED light will be orange at the
beginning of a charge. The charging duration is at
least 8 - 12 hours (but this will vary), based on the
status of the battery and temperature.
5. The orange LED will turn to green when the charging
is complete.
6. Disconnect the cord and remove the round plug from
the charge socket.
a grounded supply main.
Do not share the outlet with any other
device.
To avoid the risk of electric shock, this
equipment must only be connected to
Never use an extension cord to plug in
your battery charger.
31
EMI