Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Adept Medical STARTable
Summary of Contents for Adept Medical STARTable
- Page 1 INSTRUCTIONS FOR USE - AM0140B...
- Page 2 STARTable – User Manual Support for Trans-radial Angiography and Revascularisation This guide describes the correct set-up and use of Adept Medical’s STARTable, a product used during trans-radial catheterisation procedures. Carbon fibre board Carbon fibre board + shield + shield Adjustable shelf...
- Page 3 (and possibly over the controls) as is necessary. 2. Attach the shelf to the STARTable by locating the keyhole features over the blue coloured spigots on the vertical wall and slide down until the shelf comes to rest. See Figures 5b, 5c, 6b and 8.
- Page 4 STARTable – User Manual Support for Trans-radial Angiography and Revascularisation 3. At this point the STARBoard can be installed if it has not been already. Note: The STARTable can be used without the STARBoard however the STARBoard is recommended. 4. Once the patients arm and wrist is positioned as desired, the shelf can be adjusted by sliding it along the blue spigots as illustrated in Figure 5c.
- Page 5 STARTable – User Manual Support for Trans-radial Angiography and Revascularisation Warnings Hypersensitivity. Ensure patient has no allergic reactions to Epoxy Resin Be careful not to entrap fingers Manufacturer Adept Medical Ltd 2-6 McDonald St, Morningside, Auckland 1024, New Zealand PO Box 10075, Dominion Rd, Auckland 1446, New Zealand www.adeptmedical.co.nz...
Need help?
Do you have a question about the STARTable and is the answer not in the manual?
Questions and answers