Pollen Filter; Water Trap; Vibration Absorbers; Flexible Sound Damper - nilan CTS602 LIGHT Installation Instructions Manual

Pollen filter

As a standard, the unit is supplied with a plate filter.
If anyone in the household suffers from a pollen allergy, you can install a pollen
filter in the outdoor air intake to minimize the proportion of pollen in the indoor
air.
A pollen filter also removes approx. 50 % of harmful particles in outdoor air, so a
pollen filter is recommended if you live in a large city or close to a motorway.

Water trap

To ensure that condensate water can drain freely, a water trap must be installed.
You should check regularly that there is water in the trap. The water trap may
dry out during late spring, summer and autumn, when no condensation is formed.
If the water trap dries out, air will be sucked into the unit and condensate water
will not be able to drain. This will cause water damage.
Nilan's water trap contains a ball that ensures that no air is sucked into the unit
and that condensate water can drain freely.

Vibration absorbers

Four vibration absorbers are placed under the unit to ensure effective softening
of the vibrations of the unit against its foundation.

Flexible sound damper

To make it easy to service the unit in the future, we recommend that you fit a
flexible connection between the unit and the duct system.
Nilan's flexible sound damper absorbs sounds effectively from both the duct
system and from roof stacks.
CO -sensor
2
With a CO
higher level when there is high CO
programmed.
The CO
-sensor installed, the fan speed can be pre-programmed to run at a
2
-sensor must be ordered factory-fitted.
2
Comfort 200 Top (English)
- level in the extract air. CO
2
BY NILAN
level can be
2
11