Exercise Computer - Sunny Health & Fitness SF-RB4708 User Manual

EXERCISE COMPUTER

FUNCTION KEYS:
MODE
Press this button to change display or choose the window needs to be set.
In monitor status, hold this button for 3 seconds to reset all values to zero.
SET
Set value of Time, Distance, Calorie and Pulse when not in scan mode
RESET
Press to reset Time, Distance, Calorie and Pulse.
In monitor status, hold this button for 3 seconds to reset all values to zero.
FUNCTIONS:
SCAN
Press MODE button until "SCAN" appears, and computer will rotate through all 6 functions: Time,
Calorie, Speed, Distance, Total Distance and Pulse. Each will be displayed for 6 seconds.
SPEED (SPD)
Displays speed, range is 0.0~999.9 Mile/H.
TIME (TMR)
Counts the total time from exercise start to the end, range is 0 ~ 99 Minute.
DISTANCE (DST)
Counts the total distance from exercise start to the end and the range is 0.0 ~ 999.9 Mile.
CALORIES (CAL)
Counts the total calories consumed from exercise start to the end, range is 0.0 ~ 999.9 KCAL.
TOTAL DISTANCE (ODO)
Count the total distance since installing the batteries.
PULSE
Hold the pulse sensors to read your heart rate per minute. The range is 40 ~ 240 bpm.
AUTO START/STOP
Computer will turn on when you press any key or start exercise.
After 4 minutes of inactivity, the computer will turn off.
COUNTDOWN
The functions of Time, Distance and Calorie can be set to countdown.
Press MODE to select the function, then press SET to adjust the value. Make sure you are not in
SCAN. Start pedaling to start the countdown. When the countdown value goes to zero, the
computer will beep for 6 seconds.
11