Evonic Fires e1800 Instructions Manual
Hide thumbs
Also See for e1800:
- Installation manual (32 pages) ,
- Instruction manual (44 pages) ,
- Instruction manual (20 pages)
Table of Contents
Advertisement
MODEL(S): e1800 / e1560 / e1500 / e1030 / e1000 / e900 / e810 / e800 / e710 /
e700 / e640 / e600 / e500
IMPORTANT SAFETY INFORMATION:
Always read this manual first before attempting to install or use this fireplace. For your safety, always comply with all warnings and safety instructions contained in this
manual to prevent personal injury or property damage.
Please note: This product is only suitable for well insulated spaces or occasional use.
E-Series-180724
Advertisement
Table of Contents
Related Manuals for Evonic Fires e1800
Summary of Contents for Evonic Fires e1800
- Page 1 MODEL(S): e1800 / e1560 / e1500 / e1030 / e1000 / e900 / e810 / e800 / e710 / e700 / e640 / e600 / e500 IMPORTANT SAFETY INFORMATION: Always read this manual first before attempting to install or use this fireplace. For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage.
-
Page 2: Important Instructions
IMPORTANT INSTRUCTIONS: Please read these instructions before installation or use and keep this booklet handy for future reference. All Evonic fires products meet the requirements of the EC Directives. These directives have been met by compliance with the following standards: EN 55014-1:2006 + A2:2011 Electromagnetic compatibility. - Page 3 General Warnings: Never leave children unsupervised with an unguarded heater. Never obstruct or cover the heater outlet. Never install or use this product where it may come in contact with water i.e. a bathroom or wet room. Never use aerosols or steam cleaners near this product. Never route the electric cable near the heater outlet.
-
Page 4: Installation Method
INSTALLATION METHOD: This product has been designed to be installed into a plaster board, or existing masonry chimney breast. Please note that any GF2 models from the e-series range are not suitable to be installed into a existing chimney breast. Please seek advice from a professional, with reference to the structural integrity of the installation site. - Page 5 305mm 355mm e1560 1566mm 305mm 810mm e1560 1509mm 305mm 605mm e1800 1785mm 305mm 615mm e1800 1750mm 305mm 410mm The above table contains the minimum opening sizes re- The below table contains the final finished opening sizes once quired to house the product.
-
Page 6: Glass Removal
Glass Removal:... - Page 7 The Appliance is operated using the E-Touch App Control. The App Control can be used on either OS or Android operating systems. To obtain the App please visit either the OS App Store Or Google Play and follow the on screen instructions. Screen shot taken from Apple App Store.
-
Page 8: Product Operation
Product Operation: The appliance is operated by the e-touch App, the main standby power switch to the e-series product is located to the right of the heater outlet, which is marked with a light bulb image, to activate the product, this switch must be switch to the “ON” position. The first time the e-series product is activated both the illumination and heater will function, to switch the heater “Off”... - Page 9 LENGTH 260MM 370MM LOG SET 230MM 185MM 190MM 390MM Please Note: The images shown are suggested Log layouts, the log sets can be arranged to personal preference. e1000/1030 —LOG LAYOUT e1500/1800 —LOG LAYOUT...
- Page 10 Any parts, which have been replaced under this warranty, shall become our property. CK Fires Ltd / Evonic Fires 1 Evonic house, Clifford park, Clifford lane, Stratford-Upon-Avon, CV37 8HW...
Need help?
Do you have a question about the e1800 and is the answer not in the manual?
Questions and answers